Stamos Soldering Laboratory Power Supply | similar offers today

Brand: Stamos Soldering
EAN: 4250928680228
MPN: sls41
Category: Laboratory Equipment

The bench power supply S-LS-41 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit is very quiet and is designed for professional and industrial use in labs, the telecommunications sector, workshops with electronic devices, as well as in production facilities and testing institutes. The linear technology used means the device produces only a low ripple and low noise. The device also has a high adjustment and display resolution of 100 mV / 10 mA. Whether you're a professional in weather and environmental research or working on electrical projects around the house, the laboratory equipment from Stamos Soldering enriches your work. Thanks to the large LED display, you can easily read the set voltage and amperage values at any time. The numbers are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. With this additional fine-tuning, the dual laboratory power supply can be operated in a more individual and more precise manner to provide the exact amount of power that you need. The voltage or current can be fine-tuned to 100 mV / 10 mA. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. This double power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overcurrent protection (OCP), overload protection (OPP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. With this safety system, safe operation is guaranteed, even with intensive and ongoing use. This bench power supply has special knobs that allow you to make both rough and fine adjustments to the desired current values from 0 to 60 V DC and 0 to 20 A. During adjustment, you can observe the values in question on the large LED display and easily modify them to meet your needs. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4062859948656
MPN: sls87
Category: Laboratory Equipment

The bench power supply S-LS-87 reliably provides direct current to external devices, with individually-adjustable current and voltage. The linear technology used means the device produces only a low ripple and low noise. Whether for professionals in development or for electronics projects at home, measuring equipment from Stamos Soldering supports your project according to your requirements. Thanks to the large LED display, you can easily read the set voltage and amperage values at any time. The digits are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. You can individually set the desired values for the output current on this benchtop power supply unit using the control dials. The dials allow you to make exact adjustments to the output voltage from 0 to 60 V and the output current from 0 to 5 A. During adjustment you can check the respective values on the large LED display. If the power supply unit operates as a constant voltage source (CV), the unit automatically switches to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. This benchtop power supply unit meets the highest standards of safety: The device is equipped with overload protection (OPP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. With this monitoring system, safe operation is guaranteed, even with intensive and ongoing use. Non-slip rubber feet ensure stability for the device while also protecting the work surface from unwanted scratches. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4062859948267
MPN: sls76
Category: Laboratory Equipment

The bench power supply S-LS-76 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit from the measuring equipment collection is designed for professional and industrial use in labs, the telecommunications sector, workshops with electronic devices, as well as in production facilities and testing institutes. The linear technology used means the device produces a low ripple and low noise. Thanks to the large LED displays, you can easily read the set output voltage and current values at any time. The numbers are easy to read even in low-light conditions. In addition, the individual displays are marked with their corresponding unit abbreviation, clearly distinguishing between current voltage and amperage. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. The knobs allow you to make both rough and fine adjustments to the desired current values from 0 to 30 V DC and 0 to 50 A. During adjustment, you can monitor the values in question on the large LED display and easily modify them to meet your needs. If the power supply unit operates as a constant voltage source (CV), the unit automatically switches to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. This benchtop power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overload protection (OPP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. These safety measures guarantee safe operation even with intensive and ongoing use. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4250928680235
MPN: sls42
Category: Laboratory Equipment

The bench power supply S-LS-42 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit is very quiet and is designed for professional and industrial use in labs, the telecommunications sector, workshops with electronic devices, as well as in production facilities and testing institutes. The linear technology used means the device produces only a low ripple and low noise. The device also has a high adjustment and display resolution of 100 mV / 10 mA. Whether you're a professional in weather and environmental research or working on electrical projects around the house, the laboratory equipment from Stamos Soldering enriches your work. Thanks to the large LED display, you can easily read the set voltage and amperage values at any time. The numbers are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. With this additional fine-tuning, the dual laboratory power supply can be operated in a more individual and more precise manner to provide the exact amount of power that you need. The voltage or current can be fine-tuned to 100 mV / 10 mA. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. This double power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overcurrent protection (OCP), overload protection (OPP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. These safety measures guarantee safe operation even with intensive and ongoing use. This bench power supply has special knobs that allow you to make both rough and fine adjustments to the desired current values from 0 to 15 V DC and 0 to 60 A. During adjustment, you can observe the values in question on the large LED display and easily modify them to meet your needs. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4062859948649
MPN: sls86
Category: Laboratory Equipment

The adjustable bench power supply S-LS-86 reliably provides direct current to external devices, with individually-adjustable current and voltage. The linear technology used means the device produces only a low ripple and low noise. Whether for professionals in development or for electronics projects at home, measuring equipment from Stamos Soldering supports your project according to your requirements. Thanks to the large LED displays, you can easily read the set voltage and amperage values at any time. The digits are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. You can individually set the desired values for the output current on this benchtop power supply unit using the control dials. The dials allow you to make exact adjustments to the output voltage from 0 - 100 V and the output current from 0 - 3 A. During adjustment you can check the respective values on the large LED display. If the adjustable power supply unit operates as a constant voltage source (CV), the unit automatically switches to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. With the laboratory power supply you get an apparatus with a high safety standard: The unit has been equipped with an overload protection (OPP) as well as an overheating protection (OTP), which automatically activates an integrated fan as soon as the maximum temperature is exceeded. With this monitoring system, safe operation is guaranteed, even with intensive and ongoing use. Non-slip rubber feet ensure stability for the device while also protecting the work surface from unwanted scratches. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4062859948304
MPN: sls80
Category: Electric & Electronics Components

The bench power supply S-LS-80 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit from the measuring equipment collection is designed for professional and industrial use in labs, the telecommunications sector, workshops with electronic devices, as well as in production facilities and testing institutes. The linear technology used means the device produces a low ripple and low noise. Thanks to the large LED displays, you can easily read the set output voltage and current values at any time. The numbers are easy to read even in low-light conditions. In addition, the individual displays are marked with their corresponding unit abbreviation, clearly distinguishing between current voltage and amperage. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. The knobs allow you to make both rough and fine adjustments to the desired current values from 0 to 30 V DC and 0 to 10 A. During adjustment, you can monitor the values in question on the large LED display and easily modify them to meet your needs. If the power supply unit operates as a constant voltage source (CV), the unit automatically switches to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. This benchtop power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overload protection (OPP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. These safety measures guarantee safe operation even with intensive and ongoing use. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also equipped with a handle and can also be used as a mobile unit thanks to its light weight. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Compare prices from:
Stamos Soldering in Electric & Electronics Components

Brand: Stamos Soldering
EAN: 4062859948243
MPN: sls74
Category: Electric & Electronics Components

The bench power supply S-LS-74 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit from the measuring equipment collection is designed for professional and industrial use in labs, the telecommunications sector, workshops with electronic devices, as well as in production facilities and testing institutes. The linear technology used means the device produces a low ripple and low noise. Thanks to the large LED displays, you can easily read the set output voltage and current values at any time. The numbers are easy to read even in low-light conditions. In addition, the individual displays are marked with their corresponding unit abbreviation, clearly distinguishing between current voltage and amperage. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. The dials allow you to precisely adjust the values and thereby guarantee exact setting of the desired current from 0 to 30 V DC and 0 to 5 A for channels I and II, and 0 to 5 V and 0 to 3 A for channel III. During adjustment, you can observe the values in question on the four LED displays and easily modify them to meet your needs. Each of the three channels can be adjusted separately and each supplies one of the three current outputs with the set current values. You can easily choose between two different modes with this dual lab power supply: Parallel or series mode. In series mode you can work with twice the voltage of 60 V, while parallel mode allows you to operate with only one channel at double the current of 10 A. The power supply unit's output can thus be adapted to your individual requirements. This benchtop power supply unit meets the highest standards of safety: The device is equipped with special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. These safety measures guarantee safe operation even with intensive and ongoing use. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Compare prices from:
Stamos Soldering in Electric & Electronics Components

Brand: Stamos Soldering
EAN: 4062859200679
MPN: sls119
Category: Laboratory Equipment

The Stamos Soldering Electronic Load provides reliable measurement results in both simple and complex applications. Use it in quality assurance as well as in product development or product safety. As a PC interface, the unit has connections for USB, RS232, GPIB and LAN. The Electronic Load provides a high-precision DC power supply with precise resolution, where you have access to the four working modes CV / CC / CR / CP. You control the unit via a clearly laid out control panel, which is equipped with a rotary control for precise adjustment of both voltage and current. The graphic LCD display also shows this as a waveform. You save the waveform data via a U-Disk connection. In addition, you have up to 100 memory locations at your disposal. The clearly legible LCD display shows the values for current and voltage with an accuracy of 0.1 mA and 0.1 mV respectively. The voltage can be set within a range of 0 - 150 V, and the current can be regulated between 0 - 40 A. Thanks to 100 programmable memory locations, operation is extremely convenient. For precise control, set the load according to a constant voltage (CV), constant current (CC), constant load resistance (CR) or constant power (CP). It is used for automatic tests, for testing batteries or solar panels as well as for OPP and OCP tests. In addition, the unit offers functions for short-circuit analysis, current monitoring, switch-off memory and remote interrogation. . The DC electrical load is protected against excessive power, temperature, voltage and current. So you always use it safely in daily operation and fully exploit the power of 1500 W even in dynamic mode up to 10 kHz.
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4062859035677
MPN: sls103
Category: Laboratory Equipment

The laboratory power supply S-LS-103 is specialised to supply external devices with direct current, whereby current strength and current voltage are individually adjustable. The memory function and RS485 interface make the use of this device particularly effective. The benchtop power supply was primarily designed for professional use in the industrial sector, in laboratories, in telecommunications, for workshops with electronic devices as well as for production facilities and testing institutes. The linear technology results in low residual ripple and low noise. Due to the large LED display, you can easily read the set values of the output voltage, current and power at any time. Even when the lighting is bad, the digits are easy to read. In addition, the individual displays are provided with their respective unit abbreviations, so that the current and voltage can be clearly distinguished at any time. There are four memory spaces for frequently-repeated current values, so you can easily call them up again. You can connect the device to a computer via a RS485 interface using the Modbus communication protocol. The user-friendly lab power supply can be controlled very easily and conveniently via rotary knobs and buttons. The knobs allow for precise adjustment for the desired current from 0 to 30 V DC and output voltage from 0 to 10 A. During the adjustment, you can check the respective values on the large LED display and easily adapt them to your needs. Furthermore, the power supply unit has a control panel lock to prevent accidental changing of the set parameters. When the laboratory power supply operates as a constant voltage source (CV), the device switches automatically to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. With the adjustable laboratory power supply, you get an device with a high safety standard: The device has an overvoltage protection (OVP), an overcurrent protection (OCP), an overload protection (OPP), a current limitation and a special overheating protection (OTP). The integrated fan adapts to the internal temperature conditions and ensures optimal cooling. These precautions guarantee safe operation of the power supply, even with intensive and permanent use. The device also has a buzzing alarm, which informs you about safety deficiencies. Non-slip rubber feet additionally ensure a secure stand of the device and also protect the footprint from unwanted scratches. With the lab power supply from Stamos Soldering, you get a thoroughly professional device for the individual direct current supply of various external equipment. Download software
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos
EAN: 4250928680228
MPN: 10021071
Category: Laboratory Equipment

⭐⭐⭐⭐⭐ Laboratory Power Supply - 0-60 V - 0-20 A DC - 1,200 W by Stamos Soldering ✅ Model: S-LS-41 ✅ Item: 10021071 ⬇️ Key features High accuracy 100 mV / 10 mA DC voltage adjustment range: 0 - 60 V Current adjustment range: 0 - 20 A Large LED display for rapidly monitoring active output current and output voltage values Overheat, overvoltage, overcurrent and overload protection ⬇️ Technical details Ripples ≤1% Rms Full Scale Connector [mm] Output Sockets, Mains Connection Socket, Ground Output Terminal Protections Ovp, Ocp, Otp, Opp Resolution 100Mv/10Ma Rated current [A] 20 Line regulation Cv≤0.2%reading+2 Digits , Cc≤0.5%reading+2 Digits Load regulation ≤0.5% Reading+2 Digits Protection class I Storing humidity < 70% Rh Operating humidity [%] < 80 % Rh Storage temperature [°C] -10 - 70 Working temperature range [°C] 0-40 Manual Yes Type SWITCHING Overvoltage protection Yes Over current protection Yes Max. power consumption 1490 W Material Rubber, Plastic Colour Black Power [W] 1200
Compare prices from:
Stamos in Laboratory Equipment

Brand: Stamos
EAN: 4062859948267
MPN: 10021167
Category: Laboratory Equipment

⭐⭐⭐⭐⭐ Powerful laboratory power supply up to 1,500 W by Stamos Soldering ✅ Model: S-LS-76 ✅ Item: 10021167 ⬇️ Key features Variable—DC voltage from 0 to 30 V and current from 0 to 50 A Large LED display—rapidly monitor active output current and output voltage values Safe—smart protection from overheating, overvoltage and large loads Rubber feet—prevent slipping and scratches to work surface Simple—clearly arranged control panel with four rotary controls ⬇️ Technical details Ripples ≤ 1 % Rms Connector [mm] Output socket, mains socket, ground output terminal Protections OVP, OTP, OPP Rated current [A] 50 Line regulation CV ≤ 0.2 % mV, CC ≤ 0.5 % mA Load regulation ≤ 0,3 % Manual Yes Type SWITCHING Colour Black Power [W] 1500 Display LED Voltage [V] 230 ⬇️ Product description The bench power supply S-LS-76 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit from the measuring equipment collection is
Compare prices from:
Stamos in Laboratory Equipment

Brand: Stamos
EAN: 4062859948649
MPN: 10021177
Category: Laboratory Equipment

⭐⭐⭐⭐⭐ DC power supply with max. power of 100 V from Stamos Soldering by Stamos Soldering ✅ Model: S-LS-86 ✅ Item: 10021177 ⬇️ Key features Variable – DC voltage from 0 to 100 V and current from 0 to 3 A Large LED display – rapidly monitor active output current and output voltage values Safe – smart protection from overheating and large loads Rubber feet – prevent slipping and scratches to work surface Simple – clearly arranged control panel with two rotary controls ⬇️ Technical details Ripples 30 mV / 20 mA Connector [mm] Output sockets, mains connection socket, grounding output Protections OTP, OPP Rated current [A] 3 Line regulation CV 20 mV / CC 20 mA Load regulation CV 50 mV / CC 20 mA Storage temperature [°C] - Relative working and storage humidity [%] - Manual Yes Type SWITCHING Colour Black Power [W] 300 Display LED Voltage [V] 230 ⬇️ Product description The adjustable bench power supply S-LS-86 reliably provides direct current to external devices, with individually-adjustable
Compare prices from:
Stamos in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4250928683625
MPN: sls31
Category: Laboratory Equipment

The bench power supply S-LS-31 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit is very quiet and is designed for professional and industrial use in labs, the telecommunication sector, workshops with electronic devices and production facilities. The linear technology used means the device produces only a low ripple. The device also has a high adjustment and display resolution of 10 mV / 1 mA. The benchtop dual power supply is also equipped with an RS232 and USB port for remote operation and data collection via PC. Whether you're a professional in weather and environmental research or working on electrical projects around the house, the laboratory equipment from Stamos Soldering enriches your work. Thanks to the two large and colourful LED displays , you can easily read the set voltage and current at any time. The values are shown to the fourth digit on the LED screens, so that even the most accurate values can be represented. The numbers are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. With this additional fine-tuning, the dual laboratory power supply can be operated in a more individual and more precise manner to provide the exact amount of power that you need. The voltage or current can be fine-tuned to 10 mV / 1 mA. The easy-to-use dual power supply can be simply and conveniently controlled using the digital buttons. The device also has four memory function buttons for retrieving settings. This double power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overcurrent protection (OCP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. With this safety system, safe operation is guaranteed, even with intensive and ongoing use. The laboratory power supply unit also has a control panel lock to prevent the set parameters from being accidentally changed. This power supply has special knobs that allow you to make both rough and fine adjustments to the desired current values, guaranteeing precision. During adjustment, you can observe the values in question on the large LED displays and easily modify them to meet your needs. The dual power supply is made of sturdy sheet steel which guarantees high resilience and a long service life. The device emits a beeping sound when it is turned on or off which can likewise be turned on or off. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight, and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct...
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4062859977076
MPN: sls59
Category: Laboratory Equipment

The bench power supply S-LS-59 reliably provides direct current to external devices, with individually-adjustable current and voltage. It can be used for professional applications in industry, labs, the telecommunications sector, workshops with electronic devices and production facilities. This piece of industrial equipment also has a high display resolution of 1 mV / 1 mA. Thanks to the two 5-digit LED displays , you can easily and precisely read the set voltage and current at any time. The digits are easy to read even in poor light conditions. The user-friendly laboratory power supply can be easily and conveniently controlled via the control knobs. The knobs allow you to make both rough and fine adjustments to the values, thereby guaranteeing precise settings options for the desired current intensity. The voltage or current can be fine-tuned to 2 mV / 5 mA. The device also has five memory function buttons for retrieving settings. A soft signal will sound for monitoring purposes if values are changed. You can connect the device to a computer via the USB, RS-232 or LAN interfaces. This benchtop power supply unit meets the highest standards of safety: The adjustable lab power supply is equipped with an overload protection (OVP) and an overcurrent protection (OCP). It is also protected from overheating with a fan. With this safety system, safe operation is guaranteed, even with intensive and ongoing use. The laboratory power supply unit also has a control panel lock to prevent the set parameters from being accidentally changed. The quiet operation is extremely pleasant, especially for longer periods of use. The lab power supply is made of sturdy sheet steel which guarantees high resilience and a long service life. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit.
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4250928683595
MPN: sls28
Category: Laboratory Equipment

The dual power supply S-LS-28 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit is designed for professional and industrial use in labs, the telecommunication sector, workshops with electronic devices and production facilities. Whether you're a professional in weather and environmental research or working on electrical projects around the house, the laboratory equipment from Stamos Soldering enriches your work. This dual lab power supply allows you to easily choose between two different modes, parallel or series mode. In series mode, you can work with the double voltage of 60 volts, while parallel mode allows you to operate with only one channel at a doubled current of 10 amps. In this way, you can adjust the power of the power supply unit to suit your individual needs. The power supply is equipped with three galvanically separated outputs each for positive and negative current, which enable an appropriate distribution of voltage and current to external devices. In addition, all outputs, and therefore multiple devices, can be used at the same time. The double benchtop power supply can thus be used as both a power source and a power sink. Thanks to the four large LED displays, you can easily read the set voltage and amperage values at any time. The values are shown to the fourth digit on the LED screens, so that even the most accurate values can be represented. The glowing red numbers are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. The dual power supply also has three LED diodes that indicate which voltage is turned on: 5 V, 3.3 V or 2.5 V. A separate switch allows you to make further small adjustments to the current voltage for the adjustable channel III. This makes it possible to obtain different voltages of 2.5 V, 3.3 V or 5 V with the same channel selection. With this additional fine-tuning, the dual laboratory power supply can be operated in a more individual and more precise manner to provide the exact amount of power that you need. This dual power supply unit meets the highest standards of safety: The device is equipped with special overheat protection which automatically activates an integrated fan as soon as the maximum temperature is exceeded. With this safety system, safe operation is guaranteed, even with intensive and ongoing use. This power supply has special knobs that allow you to make both rough and fine individual adjustments to the desired current values, guaranteeing precision. During adjustment, you can observe the values in question on the large LED displays and easily modify them to meet your needs. The dual power supply is made of sturdy sheet steel which guarantees high resilience and a long service life. Non-slip rubber feet ensure additional stability for the device while also protecting the work...
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4062859948359
Category: Measurement

Compare prices from:
Stamos Soldering in Measurement

Brand: Stamos Soldering
EAN: 4062859948281
Category: Measurement

Compare prices from:
Stamos Soldering in Measurement

Brand: Stamos Soldering
EAN: 4062859948243
Category: Measurement

Compare prices from:
Stamos Soldering in Measurement

Brand: Stamos Soldering
EAN: 4250928680228
Category: Measurement

Compare prices from:
Stamos Soldering in Measurement

Brand: Stamos Soldering
EAN: 4062859948250
Category: Measurement

Compare prices from:
Stamos Soldering in Measurement

Brand: Stamos Soldering
EAN: 4250928680143
Category: Measurement

Compare prices from:
Stamos Soldering in Measurement

Brand: Stamos Soldering
EAN: 4062859948274
Category: Measurement

Compare prices from:
Stamos Soldering in Measurement

Brand: Stamos Soldering
EAN: 4062859948342
Category: Measurement

Compare prices from:
Stamos Soldering in Measurement