Msw Factory Second Dehumidifier 60 | similar offers today
-20%1 
- Msw -
199 GBP 249 GBP
Msw Factory Second Aluminium Tool Box - 91 X 44.5 X 43 Cm - 119 L Msw-atb-910
Expondo.co.uk
Brand: Msw
EAN: 4250928699121
MPN: mswatb910
Category: Miscellaneous
You're on your way to the client, but where to put all your tools? We have the solution! The aluminium tool box MSW-ATB-910 is a practical aluminium transport box for keeping your tools safe and dry. Two riveted aluminium hinges and two ergonomic handles on the sides ensure easy and convenient use. Whether in private life or on the job, the workshop equipment from MSW is a boon for any workshop. The box, which measures 91 x 44.5 x 43 cm, should provide plenty of space for all your tools. The tool box is made of aluminium, which is not only lightweight. but also resistant to corrosion. The material is 1.3 mm thick, allowing you to transport and store even heavy tools. The box protects your tools from the sun's rays, water and dirt. The hinges are riveted and stabilise the lid. This is noticeable when opening and closing the lid. Both of the ergonomic rubberised handles are also riveted. In addition, the drawbar box has two lockable catch fasteners which keep the box securely closed even during transport. There are two chains mounted inside the box which hold the lid open at a 90° angle.
Compare prices from:
Msw in Miscellaneous
EAN: 4250928699121
MPN: mswatb910
Category: Miscellaneous
You're on your way to the client, but where to put all your tools? We have the solution! The aluminium tool box MSW-ATB-910 is a practical aluminium transport box for keeping your tools safe and dry. Two riveted aluminium hinges and two ergonomic handles on the sides ensure easy and convenient use. Whether in private life or on the job, the workshop equipment from MSW is a boon for any workshop. The box, which measures 91 x 44.5 x 43 cm, should provide plenty of space for all your tools. The tool box is made of aluminium, which is not only lightweight. but also resistant to corrosion. The material is 1.3 mm thick, allowing you to transport and store even heavy tools. The box protects your tools from the sun's rays, water and dirt. The hinges are riveted and stabilise the lid. This is noticeable when opening and closing the lid. Both of the ergonomic rubberised handles are also riveted. In addition, the drawbar box has two lockable catch fasteners which keep the box securely closed even during transport. There are two chains mounted inside the box which hold the lid open at a 90° angle.
Compare prices from:
Msw in Miscellaneous
-20%2 
- Msw -
119 GBP 149 GBP
Msw Factory Second Industrial Electric Heater With Cooling Function - 0 To 40 °c - 15.000 W Msw-cteh-15000
Expondo.co.uk
Brand: Msw
EAN: 4250928690890
MPN: mswcteh15000
Category: Heating Appliances
Nobody likes to freeze, especially not while working. This is why MSW offers the environmentally friendly, health-conscious option for warming all your premises with the electric heater MSW-CTEH-15000. Whether it's in the garage, workshop or even on a construction site, this heater ensures pleasant warmth during cold spells or in transitional periods. The ventilation function can also be used without the heating, for cooling down rooms at warm temperatures. The electric heater has a heating power of 15.000 watts, which results in a capacity of 1.086 m³/h. A fast, even heating of homes or offices is guaranteed. The heater is predestined for use in closed or poorly ventilated areas, as there are no flame, emissions, odours or moisture. The ventilator draws cold air into the fan, which then flows through to the heater for a clean, efficient and safe heating. The device only makes a very low noise. You can therefore work in peace! Due to the integrated thermostat control, the hot air flow can be adjusted from 0 to 40 °C to the desired temperature. The temperature control has three levels. You can choose between 95 Watts, 5.000 Watts and 15.000 Watts. Due to its compact dimensions and its low weight of 14 kg, the electric heater can be easily transported. You can use the heater in different rooms or take it to other places for events, as an additional source of heat. The electric heater has a sturdy steel construction and a long service life. The device adheres to the IP protection class IP24 and has four rubberised feet, which provide optimum grip.
Compare prices from:
Msw in Heating Appliances
EAN: 4250928690890
MPN: mswcteh15000
Category: Heating Appliances
Nobody likes to freeze, especially not while working. This is why MSW offers the environmentally friendly, health-conscious option for warming all your premises with the electric heater MSW-CTEH-15000. Whether it's in the garage, workshop or even on a construction site, this heater ensures pleasant warmth during cold spells or in transitional periods. The ventilation function can also be used without the heating, for cooling down rooms at warm temperatures. The electric heater has a heating power of 15.000 watts, which results in a capacity of 1.086 m³/h. A fast, even heating of homes or offices is guaranteed. The heater is predestined for use in closed or poorly ventilated areas, as there are no flame, emissions, odours or moisture. The ventilator draws cold air into the fan, which then flows through to the heater for a clean, efficient and safe heating. The device only makes a very low noise. You can therefore work in peace! Due to the integrated thermostat control, the hot air flow can be adjusted from 0 to 40 °C to the desired temperature. The temperature control has three levels. You can choose between 95 Watts, 5.000 Watts and 15.000 Watts. Due to its compact dimensions and its low weight of 14 kg, the electric heater can be easily transported. You can use the heater in different rooms or take it to other places for events, as an additional source of heat. The electric heater has a sturdy steel construction and a long service life. The device adheres to the IP protection class IP24 and has four rubberised feet, which provide optimum grip.
Compare prices from:
Msw in Heating Appliances
-21%3 
- Msw -
59 GBP 75 GBP
Msw Factory Second Fender Arch Roller Msw-bg-655
Expondo.co.uk
Brand: Msw
EAN: 4250928699084
MPN: mswbg655
Category: Miscellaneous
The arch roller MSW-BG-655 from MSW is highly versatile. It can be used for reforming fenders on all types of cars and vans. The arch roller is easy to use and always achieves fantastic results. This arch roller is indispensable in any automotive workshop or bodywork construction. You can use the arch roller to widen the fenders of cars or vans in just a few steps. It can be especially useful for flaring the edges of the fender, which can gain you the deciding extra centimetre for wider wheels. The fender roller is very easy to use The mounting hub is fastened to the wheel suspension using bolts and the prepunched holes. Depending on the model of the vehicle, there are 4 to 5 openings available which give a margin of 90 to 120 millimetres for flexible mounting. The connection is highly stable. Next, the pivot arm is brought into position. In order to apply even pressure to the fender from the inside, the arm can be adjusted to a length of between 52 and 66 centimetres using a knob and then pressed against the fender using a lever. At the end of the pivot arm, the pressure is transferred to the fender via a roller. The arm itself can be moved 180° for reforming the fender. The arch roller's versatile adjustment options allow you to widen the fender bit by bit to fit the measurements of new wheels. This method is especially gentle on paint if, before beginning, you heat the fender with a heat gun, which you can also find at expondo.
Compare prices from:
Msw in Miscellaneous
EAN: 4250928699084
MPN: mswbg655
Category: Miscellaneous
The arch roller MSW-BG-655 from MSW is highly versatile. It can be used for reforming fenders on all types of cars and vans. The arch roller is easy to use and always achieves fantastic results. This arch roller is indispensable in any automotive workshop or bodywork construction. You can use the arch roller to widen the fenders of cars or vans in just a few steps. It can be especially useful for flaring the edges of the fender, which can gain you the deciding extra centimetre for wider wheels. The fender roller is very easy to use The mounting hub is fastened to the wheel suspension using bolts and the prepunched holes. Depending on the model of the vehicle, there are 4 to 5 openings available which give a margin of 90 to 120 millimetres for flexible mounting. The connection is highly stable. Next, the pivot arm is brought into position. In order to apply even pressure to the fender from the inside, the arm can be adjusted to a length of between 52 and 66 centimetres using a knob and then pressed against the fender using a lever. At the end of the pivot arm, the pressure is transferred to the fender via a roller. The arm itself can be moved 180° for reforming the fender. The arch roller's versatile adjustment options allow you to widen the fender bit by bit to fit the measurements of new wheels. This method is especially gentle on paint if, before beginning, you heat the fender with a heat gun, which you can also find at expondo.
Compare prices from:
Msw in Miscellaneous
