Hillvert Soaker Hose 200 M | similar offers today

Brand: Hillvert
EAN: 4062859972453
MPN: htcostigan50x12s02
Category: Garden Hand Tools

This hose leaks, and that's a good thing: In this way, the soaker hose can distribute the water evenly between your garden beds. Standard sprinklers, which water from above, are not advisable for many vegetables such as tomatoes or pumpkins which have leaves that are sensitive to moisture. The drip irrigation system from hillvert distributes the water directly to the soil along the entire length of the hose so that it can get directly to the roots without damaging the leaves. The garden soaker hose is 50 m long. The connectors allow you to customise the perforated hose to fit your bed or garden. The system comes with both T- and corner joints. Simply cut the hose at the point where you want it to change direction and create a joint by attaching the connectors. Depending on the number of connectors and additional weeper hoses, you can expand your irrigation system as you wish. The porous hose also comes with two 1/2" quick couplers and a tap piece with grommet. The porous hose be powered with maximum 4 bar of water pressure, which can achieve a flow rate of up to 240 L/h. For optimal irrigation, the pressure should be reduced as much as necessary. The rubber and polyethylene material is highly robust and flexible. This allows you to easily and stably align it on the ground, even with increased water pressure. The hose is especially well suited for use in a greenhouse, where space for irrigation is limited and a solution has to be found in a confined space. A pair of size L gardening gloves are included in the delivery in order to enable you to lay the hose without mess.
Compare prices from:
Hillvert in Garden Hand Tools

Brand: Hillvert
EAN: 4062859972491
MPN: htcostigan50x12s04
Category: Flowers, Plants & Trees

This hose leaks, and that's a good thing: In this way, the soaker hose can distribute the water evenly between your garden beds. Standard sprinklers, which water from above, are not advisable for many vegetables such as tomatoes or pumpkins which have leaves that are sensitive to moisture. The drip irrigation system from hillvert distributes the water directly to the soil along the entire length of the hose so that it can get directly to the roots without damaging the leaves. The garden soaker hose is 50 m long. The connectors and 20 included fastening hooks allow you to customise the perforated hose to fit your bed or garden. The system comes with both T- and corner joints. Simply cut the hose at the point where you want it to change direction and create a joint by attaching the connectors. Depending on the number of connectors and additional weeper hoses, you can expand your irrigation system as you wish. The porous hose also comes with one 1/2" hose piece and a tap piece. The porous hose can be powered with maximum 4 bar of water pressure, which can achieve a flow rate of up to 240 L/h. For optimal irrigation, the pressure should be reduced as much as necessary. The rubber and polyethylene material is highly robust and flexible. This allows you to easily and stably align it on the ground, even with increased water pressure. The hose is especially well suited for use in a greenhouse, where space for irrigation is limited and a solution has to be found in a confined space. A pair of size L gardening gloves are included in the delivery in order to enable you to lay the hose without mess.
Compare prices from:
Hillvert in Flowers, Plants & Trees

Brand: Hillvert
EAN: 4062859972477
MPN: htcostigan50x12s03
Category: Garden Hand Tools

This hose leaks, and that's a good thing: In this way, the soaker hose can distribute the water evenly between your garden beds. Standard sprinklers, which water from above, are not advisable for many vegetables such as tomatoes or pumpkins which have leaves that are sensitive to moisture. The drip irrigation system distributes the water directly to the soil along the entire length of the hose so that it can get directly to the roots without damaging the leaves. The garden soaker hose is 50 m long. The connectors allow you to customise the perforated hose to fit your bed or garden. The system comes with both T- and corner joints. Simply cut the hose at the point where you want it to change direction and create a joint by attaching the connectors. Depending on the number of connectors and additional weeper hoses, you can expand your irrigation system as you wish. The porous hose also comes with two 1/2" hose pieces for connection to the water tap. The porous hose can be powered with maximum 4 bar of water pressure, which can achieve a flow rate in the hose of up to 240 L/h. For optimal irrigation, the pressure should be reduced as much as necessary. The rubber and polyethylene material is highly robust and flexible. This allows you to easily and stably align it on the ground, even with increased water pressure. The hose is especially well suited for use in a greenhouse, where space for irrigation is limited and a solution has to be found in a confined space. A pair of size L gardening gloves are included in the delivery in order to enable you to lay the hose without mess.
Compare prices from:
Hillvert in Garden Hand Tools

Brand: Hillvert
EAN: 4062859216656
MPN: htcostigan400
Category: Plumbing

This hose drips, and that's a good thing This means that the drip hose distributes the water evenly between your beds. With many vegetables such as tomatoes or pumpkins, it is advisable that the leaves get as little moisture as possible, in contrast to the common sprinkler method. The drip irrigation hose from hillvert distributes the water directly onto the earth through the entire length of the hose. This way, the water reaches the roots immediately without damaging the foliage. The garden soaker hose has a 400 m length. With the help of the connectors, you can adapt the perforated hose exactly to your bed or garden. Various straight, T and corner connectors are available for this purpose. Simply cut the hose at the point where you want it to take a different direction and insert the spacers as a connection. Depending on the number of connectors and drip hoses, you can expand your irrigation system as much as you like. The drip tube runs at a maximum pressure of 0.5 - 3 bar. This means, it releases 2 l of water per drip hole, per hour. The drip holes are at an optimal distance of 33 cm and are each inserted twice. If one is clogged, the other still releases enough water. For optimal watering, reduce the pressure as much as necessary - this reduces water consumption by up to 70 %. The plastic used for the drip tube is extremely robust as well as supple. This allows you to easily and stably align the hose on the ground, even with increased water pressure. The hose is particularly well suited for operation in a greenhouse where space for watering is limited and a solution is needed in a confined space. In addition, it is possible to use the hose for fertilising without damaging it. Simply, mix fertiliser into the water. This saves up to 85 % water, 65 % energy and increases productivity by up to 30 %.
Compare prices from:
Hillvert in Plumbing

Brand: Hillvert
EAN: 4062859216632
MPN: htcostigan100
Category: Plumbing

This hose drips, and that's a good thing This means that the drip hose distributes the water evenly between your beds. With many vegetables such as tomatoes or pumpkins, it is advisable that the leaves get as little moisture as possible, in contrast to the common sprinkler method. The drip irrigation hose from hillvert distributes the water directly onto the earth through the entire length of the hose. This way, the water reaches the roots immediately without damaging the foliage. The garden soaker hose has a 100 m length. With the help of the connectors, you can adapt the perforated hose exactly to your bed or garden. Various straight, T and corner connectors are available for this purpose. Simply cut the hose at the point where you want it to take a different direction and insert the spacers as a connection. Depending on the number of connectors and drip hoses, you can expand your irrigation system as much as you like. The drip tube runs at a maximum pressure of 0.5 - 3 bar. This means, it releases 2 l of water per drip hole, per hour. The drip holes are at an optimal distance of 33 cm and are each inserted twice. If one is clogged, the other still releases enough water. For optimal watering, reduce the pressure as much as necessary - this reduces water consumption by up to 70 %. The plastic used for the drip tube is extremely robust as well as supple. This allows you to easily and stably align the hose on the ground, even with increased water pressure. The hose is particularly well suited for operation in a greenhouse where space for watering is limited and a solution is needed in a confined space. In addition, it is possible to use the hose for fertilising without damaging it. Simply, mix fertiliser into the water. This saves up to 85 % water, 65 % energy and increases productivity by up to 30 %.
Compare prices from:
Hillvert in Plumbing

Brand: Hillvert
EAN: 4062859216649
MPN: htcostigan200
Category: Plumbing

This hose drips, and that's a good thing This means that the drip hose distributes the water evenly between your beds. With many vegetables such as tomatoes or pumpkins, it is advisable that the leaves get as little moisture as possible, in contrast to the common sprinkler method. The drip irrigation hose from hillvert distributes the water directly onto the earth through the entire length of the hose. This way, the water reaches the roots immediately without damaging the foliage. The garden soaker hose has a 200 m length. With the help of the connectors, you can adapt the perforated hose exactly to your bed or garden. Various straight, T and corner connectors are available for this purpose. Simply cut the hose at the point where you want it to take a different direction and insert the spacers as a connection. Depending on the number of connectors and drip hoses, you can expand your irrigation system as much as you like. The drip tube runs at a maximum pressure of 0.5 - 3 bar. This means, it releases 2 l of water per drip hole, per hour. The drip holes are at an optimal distance of 33 cm and are each inserted twice. If one is clogged, the other still releases enough water. For optimal watering, reduce the pressure as much as necessary - this reduces water consumption by up to 70 %. The plastic used for the drip tube is extremely robust as well as supple. This allows you to easily and stably align the hose on the ground, even with increased water pressure. The hose is particularly well suited for operation in a greenhouse where space for watering is limited and a solution is needed in a confined space. In addition, it is possible to use the hose for fertilising without damaging it. Simply, mix fertiliser into the water. This saves up to 85 % water, 65 % energy and increases productivity by up to 30 %.
Compare prices from:
Hillvert in Plumbing

Brand: Hillvert
EAN: 4062859972453
Category: Home and Garden

Compare prices from:
Hillvert in Home and Garden

Brand: Hillvert
EAN: 4062859972477
Category: Home and Garden

Compare prices from:
Hillvert in Home and Garden

Brand: Hillvert
EAN: 4062859216632
Category: Home and Garden

Compare prices from:
Hillvert in Home and Garden

Brand: Hillvert
EAN: 4062859972392
Category: Home and Garden

Compare prices from:
Hillvert in Home and Garden

Brand: Hillvert
EAN: 4062859972583
Category: Home and Garden

Compare prices from:
Hillvert in Home and Garden

Brand: Hillvert
EAN: 4062859216649
Category: Home and Garden

Compare prices from:
Hillvert in Home and Garden

Brand: Hillvert
EAN: 4062859216656
Category: Home and Garden

Compare prices from:
Hillvert in Home and Garden

Brand: Hillvert
EAN: 4062859972507
Category: Home and Garden

Compare prices from:
Hillvert in Home and Garden