Stamos Soldering | Offers Measurement

Brand: Stamos Soldering
EAN: 4062859200679
MPN: sls119
Category: Laboratory Equipment

The Stamos Soldering Electronic Load provides reliable measurement results in both simple and complex applications. Use it in quality assurance as well as in product development or product safety. As a PC interface, the unit has connections for USB, RS232, GPIB and LAN. The Electronic Load provides a high-precision DC power supply with precise resolution, where you have access to the four working modes CV / CC / CR / CP. You control the unit via a clearly laid out control panel, which is equipped with a rotary control for precise adjustment of both voltage and current. The graphic LCD display also shows this as a waveform. You save the waveform data via a U-Disk connection. In addition, you have up to 100 memory locations at your disposal. The clearly legible LCD display shows the values for current and voltage with an accuracy of 0.1 mA and 0.1 mV respectively. The voltage can be set within a range of 0 - 150 V, and the current can be regulated between 0 - 40 A. Thanks to 100 programmable memory locations, operation is extremely convenient. For precise control, set the load according to a constant voltage (CV), constant current (CC), constant load resistance (CR) or constant power (CP). It is used for automatic tests, for testing batteries or solar panels as well as for OPP and OCP tests. In addition, the unit offers functions for short-circuit analysis, current monitoring, switch-off memory and remote interrogation. . The DC electrical load is protected against excessive power, temperature, voltage and current. So you always use it safely in daily operation and fully exploit the power of 1500 W even in dynamic mode up to 10 kHz.
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4062859200662
MPN: sls118
Category: Electric & Electronics Components

The Stamos Soldering Electronic Load provides reliable measurement results in both simple and complex applications. Use it in quality assurance as well as in product development or product safety. As a PC interface, the unit has connections for USB, RS232, GPIB and LAN. The Electronic Load provides a high-precision DC power supply with precise resolution, where you have access to the four working modes CV / CC / CR / CP. You control the unit via a clearly laid out control panel, which is equipped with a rotary control for precise adjustment of both voltage and current. The graphic LCD display also shows this as a waveform. You can save the waveform data via a U-Disk connection. In addition, you have up to 100 memory locations at your disposal. The clearly legible LCD display shows the values for current and voltage with an accuracy of 0.1 mA and 0.1 mV respectively. The voltage can be set within a range of 0 - 150 V, and the current can be regulated between 0 - 40 A. Thanks to 100 programmable memory locations, operation is extremely convenient. For precise control, set the load according to a constant voltage (CV), constant current (CC), constant load resistance (CR) or constant power (CP). It is used for automatic tests, for testing batteries or solar panels as well as for OPP and OCP tests. In addition, the unit offers functions for short-circuit analysis, current monitoring, switch-off memory and remote interrogation. . The DC electrical load is protected against excessive power, temperature, voltage and current. So you always use it safely in daily operation and fully exploit the power of 500 W even in dynamic mode up to 10 kHz.
Compare prices from:
Stamos Soldering in Electric & Electronics Components

Brand: Stamos Soldering
EAN: 4062859948267
MPN: sls76
Category: Laboratory Equipment

The bench power supply S-LS-76 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit from the measuring equipment collection is designed for professional and industrial use in labs, the telecommunications sector, workshops with electronic devices, as well as in production facilities and testing institutes. The linear technology used means the device produces a low ripple and low noise. Thanks to the large LED displays, you can easily read the set output voltage and current values at any time. The numbers are easy to read even in low-light conditions. In addition, the individual displays are marked with their corresponding unit abbreviation, clearly distinguishing between current voltage and amperage. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. The knobs allow you to make both rough and fine adjustments to the desired current values from 0 to 30 V DC and 0 to 50 A. During adjustment, you can monitor the values in question on the large LED display and easily modify them to meet your needs. If the power supply unit operates as a constant voltage source (CV), the unit automatically switches to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. This benchtop power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overload protection (OPP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. These safety measures guarantee safe operation even with intensive and ongoing use. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4062859977069
MPN: sls58
Category: Electric & Electronics Components

The bench power supply S-LS-58 reliably provides direct current to external devices, with individually-adjustable current and voltage. It can be used for professional applications in industry, labs, the telecommunications sector, workshops with electronic devices and production facilities. This piece of industrial equipment also has a high adjustment and display resolution of 1 mV / 1 mA. Thanks to the two 5-digit LED displays , you can easily and precisely read the set voltage and current at any time. The digits are easy to read even in poor light conditions. The user-friendly laboratory power supply can be easily and conveniently controlled via the control knobs. The knobs allow you to make both rough and fine adjustments to the values, thereby guaranteeing precise settings options for the desired current intensity. The voltage or current can be fine-tuned to 1 mV / 1 mA. The device also has five memory function buttons for retrieving settings. A soft signal will sound for monitoring purposes if values are changed. You can connect the device to a computer via the USB, RS-232 or LAN interfaces. This benchtop power supply unit meets the highest standards of safety: The adjustable lab power supply is equipped with an overload protection (OVP) and an overcurrent protection (OCP). It is also protected from overheating with a fan. With this safety system, safe operation is guaranteed, even with intensive and ongoing use. The laboratory power supply unit also has a control panel lock to prevent the set parameters from being accidentally changed. The quiet operation is extremely pleasant, especially for longer periods of use. The lab power supply is made of sturdy sheet steel which guarantees high resilience and a long service life. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit.
Compare prices from:
Stamos Soldering in Electric & Electronics Components

Brand: Stamos Soldering
EAN: 4062859977076
MPN: sls59
Category: Laboratory Equipment

The bench power supply S-LS-59 reliably provides direct current to external devices, with individually-adjustable current and voltage. It can be used for professional applications in industry, labs, the telecommunications sector, workshops with electronic devices and production facilities. This piece of industrial equipment also has a high display resolution of 1 mV / 1 mA. Thanks to the two 5-digit LED displays , you can easily and precisely read the set voltage and current at any time. The digits are easy to read even in poor light conditions. The user-friendly laboratory power supply can be easily and conveniently controlled via the control knobs. The knobs allow you to make both rough and fine adjustments to the values, thereby guaranteeing precise settings options for the desired current intensity. The voltage or current can be fine-tuned to 2 mV / 5 mA. The device also has five memory function buttons for retrieving settings. A soft signal will sound for monitoring purposes if values are changed. You can connect the device to a computer via the USB, RS-232 or LAN interfaces. This benchtop power supply unit meets the highest standards of safety: The adjustable lab power supply is equipped with an overload protection (OVP) and an overcurrent protection (OCP). It is also protected from overheating with a fan. With this safety system, safe operation is guaranteed, even with intensive and ongoing use. The laboratory power supply unit also has a control panel lock to prevent the set parameters from being accidentally changed. The quiet operation is extremely pleasant, especially for longer periods of use. The lab power supply is made of sturdy sheet steel which guarantees high resilience and a long service life. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit.
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4250928680228
MPN: sls41
Category: Laboratory Equipment

The bench power supply S-LS-41 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit is very quiet and is designed for professional and industrial use in labs, the telecommunications sector, workshops with electronic devices, as well as in production facilities and testing institutes. The linear technology used means the device produces only a low ripple and low noise. The device also has a high adjustment and display resolution of 100 mV / 10 mA. Whether you're a professional in weather and environmental research or working on electrical projects around the house, the laboratory equipment from Stamos Soldering enriches your work. Thanks to the large LED display, you can easily read the set voltage and amperage values at any time. The numbers are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. With this additional fine-tuning, the dual laboratory power supply can be operated in a more individual and more precise manner to provide the exact amount of power that you need. The voltage or current can be fine-tuned to 100 mV / 10 mA. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. This double power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overcurrent protection (OCP), overload protection (OPP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. With this safety system, safe operation is guaranteed, even with intensive and ongoing use. This bench power supply has special knobs that allow you to make both rough and fine adjustments to the desired current values from 0 to 60 V DC and 0 to 20 A. During adjustment, you can observe the values in question on the large LED display and easily modify them to meet your needs. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4250928683595
MPN: sls28
Category: Electric & Electronics Components

The dual power supply S-LS-28 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit is designed for professional and industrial use in labs, the telecommunication sector, workshops with electronic devices and production facilities. Whether you're a professional in weather and environmental research or working on electrical projects around the house, the laboratory equipment from Stamos Soldering enriches your work. This dual lab power supply allows you to easily choose between two different modes, parallel or series mode. In series mode, you can work with the double voltage of 60 volts, while parallel mode allows you to operate with only one channel at a doubled current of 10 amps. In this way, you can adjust the power of the power supply unit to suit your individual needs. The power supply is equipped with three galvanically separated outputs each for positive and negative current, which enable an appropriate distribution of voltage and current to external devices. In addition, all outputs, and therefore multiple devices, can be used at the same time. The double benchtop power supply can thus be used as both a power source and a power sink. Thanks to the four large LED displays, you can easily read the set voltage and amperage values at any time. The values are shown to the fourth digit on the LED screens, so that even the most accurate values can be represented. The glowing red numbers are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. The dual power supply also has three LED diodes that indicate which voltage is turned on: 5 V, 3.3 V or 2.5 V. A separate switch allows you to make further small adjustments to the current voltage for the adjustable channel III. This makes it possible to obtain different voltages of 2.5 V, 3.3 V or 5 V with the same channel selection. With this additional fine-tuning, the dual laboratory power supply can be operated in a more individual and more precise manner to provide the exact amount of power that you need. This dual power supply unit meets the highest standards of safety: The device is equipped with special overheat protection which automatically activates an integrated fan as soon as the maximum temperature is exceeded. With this safety system, safe operation is guaranteed, even with intensive and ongoing use. This power supply has special knobs that allow you to make both rough and fine individual adjustments to the desired current values, guaranteeing precision. During adjustment, you can observe the values in question on the large LED displays and easily modify them to meet your needs. The dual power supply is made of sturdy sheet steel which guarantees high resilience and a long service life. Non-slip rubber feet ensure additional stability for the device while also protecting the work...
Compare prices from:
Stamos Soldering in Electric & Electronics Components

Brand: Stamos Soldering
EAN: 4250928680235
MPN: sls42
Category: Laboratory Equipment

The bench power supply S-LS-42 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit is very quiet and is designed for professional and industrial use in labs, the telecommunications sector, workshops with electronic devices, as well as in production facilities and testing institutes. The linear technology used means the device produces only a low ripple and low noise. The device also has a high adjustment and display resolution of 100 mV / 10 mA. Whether you're a professional in weather and environmental research or working on electrical projects around the house, the laboratory equipment from Stamos Soldering enriches your work. Thanks to the large LED display, you can easily read the set voltage and amperage values at any time. The numbers are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. With this additional fine-tuning, the dual laboratory power supply can be operated in a more individual and more precise manner to provide the exact amount of power that you need. The voltage or current can be fine-tuned to 100 mV / 10 mA. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. This double power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overcurrent protection (OCP), overload protection (OPP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. These safety measures guarantee safe operation even with intensive and ongoing use. This bench power supply has special knobs that allow you to make both rough and fine adjustments to the desired current values from 0 to 15 V DC and 0 to 60 A. During adjustment, you can observe the values in question on the large LED display and easily modify them to meet your needs. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4062859035684
MPN: sls104
Category: Laboratory Equipment

The laboratory power supply S-LS-104 is specialised to supply external devices with direct current, whereby current strength and current voltage are individually adjustable. The benchtop power supply was primarily designed for professional use in the industrial sector, in laboratories, in telecommunications, for workshops with electronic devices as well as for production facilities and testing institutes. The linear technology results in low residual ripple and low noise. Due to the large LED display, you can easily read the set values of the output voltage, current and power at any time. Even when the lighting is bad, the digits are easy to read. In addition, the individual displays are provided with their respective unit abbreviations, so that the current and voltage can be clearly distinguished at any time. The user-friendly lab power supply can be controlled very easily and conveniently via rotary knobs. The knobs allow for precise adjustment for the desired current from 0 to 60 V DC and output voltage from 0 to 20 A. During the adjustment, you can check the respective values on the large LED display and easily adapt them to your needs. When the laboratory power supply operates as a constant voltage source (CV), the device switches automatically to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. With the adjustable laboratory power supply, you get an device with a high safety standard: The device has an overcurrent protection (OCP), an overvoltage protection (OVP), an overload protection (OPP), a current limitation and a special overheating protection (OTP). The integrated fan adapts to the internal temperature conditions and ensures optimal cooling. These precautions guarantee a safe operation of the power supply, even with intensive and permanent use. The device also has a summing alarm, which informs you about safety deficiencies. Non-slip rubber feet additionally ensure a secure stand of the device and also protect the footprint from unwanted scratches. With the lab power supply from Stamos Soldering, you get a thoroughly professional device for the individual direct current supply of various external equipment.
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4260223028076
MPN: sls6
Category: Electric & Electronics Components

The Soldering Station S-LS-6 by Stamos Soldering is easy to operate and offers highest comfort when soldering. This professional soldering station was conceived especially for repairs in industry and manufacture or for hobby electricians. Thanks to the compact design and an ergonomic carrying handle it is space saving and mobile. Of course all soldering stations by Stamos Soldering are secured against ESD. The soldering station’s base functions as a power supply unit and offers all desired functions and connections. Additionally it has a large LED display for precise indication of both irons’ temperatures (soldering and hot air). Moreover the Soldering Station S-LS-6 is equipped with a side rack for holding the hot air gun as well as a rack for the soldering iron with a dry sponge. The 650 watt hot air gun is suited for soldering as well as desoldering surface mounted devices (SMD) with the hot air technique. The integrated heating element guarantees efficient heat transfer. In addition to the base and the soldering irons you also receive following accessories: a magnifying lamp for soldering work, 9 soldering tips, 5 hot air nozzles, a pair of soldering tweezers for handling hot parts, desoldering braid to remove solder joints as well as an IC popper. The tin roller is mounted only for demonstration purposes and not included in the delivery package.
Compare prices from:
Stamos Soldering in Electric & Electronics Components

Brand: Stamos Soldering
EAN: 4260223028113
MPN: sls10
Category: Electric & Electronics Components

The Soldering Station S-LS-10 by Stamos Soldering is easy to operate and offers highest comfort when soldering. This professional soldering station was conceived especially for repairs in industry and manufacture or for hobby electricians. Thanks to the compact design and an ergonomic carrying handle it is space saving and mobile. Of course all soldering stations by Stamos Soldering are secured against ESD. The soldering station’s base functions as a power supply unit and offers all desired functions and connections. Additionally it has a large LED display for precise indication of both irons’ temperatures (soldering and hot air). Moreover the Soldering Station S-LS-10 is equipped with a side rack for holding the hot air gun as well as a rack for the soldering iron with a dry sponge. The 650 watt hot air gun is suited for soldering as well as desoldering surface mounted devices (SMD) with the hot air technique. The integrated heating element guarantees efficient heat transfer. In addition to the base and the soldering irons you also receive following accessories: a magnifying lamp for soldering work, 9 soldering tips, 4 hot air nozzles, desoldering braid to remove solder joints as well as an IC popper.
Compare prices from:
Stamos Soldering in Electric & Electronics Components

Brand: Stamos Soldering
EAN: 4062859948274
MPN: sls77
Category: Laboratory Equipment

The bench power supply S-LS-77 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit from the measuring equipment collection is designed for professional and industrial use in labs, the telecommunications sector, workshops with electronic devices, as well as in production facilities and testing institutes. The linear technology used means the device produces a low ripple and low noise. Thanks to the large LED displays, you can easily read the set output voltage and current values at any time. The numbers are easy to read even in low-light conditions. In addition, the individual displays are marked with their corresponding unit abbreviation, clearly distinguishing between current voltage and amperage. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. The knobs allow you to make both rough and fine adjustments to the desired current values from 0 to 60 V DC and 0 to 10 A. During adjustment, you can monitor the values in question on the large LED display and easily modify them to meet your needs. If the power supply unit operates as a constant voltage source (CV), the unit automatically switches to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. This benchtop power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overload protection (OPP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. These safety measures guarantee safe operation even with intensive and ongoing use. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4062859948281
MPN: sls78
Category: Laboratory Equipment

The bench power supply S-LS-78 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit from the measuring equipment collection is designed for professional and industrial use in labs, the telecommunications sector, workshops with electronic devices, as well as in production facilities and testing institutes. The linear technology used means the device produces a low ripple and low noise. Thanks to the large LED displays, you can easily read the set output voltage and current values at any time. The numbers are easy to read even in low-light conditions. In addition, the individual displays are marked with their corresponding unit abbreviation, clearly distinguishing between current voltage and amperage. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. The knobs allow you to make both rough and fine adjustments to the desired current values from 0 to 30 V DC and 0 to 30 A. During adjustment, you can monitor the values in question on the large LED display and easily modify them to meet your needs. If the power supply unit operates as a constant voltage source (CV), the unit automatically switches to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. This benchtop power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overload protection (OPP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. These safety measures guarantee safe operation even with intensive and ongoing use. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4062859948243
MPN: sls74
Category: Electric & Electronics Components

The bench power supply S-LS-74 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit from the measuring equipment collection is designed for professional and industrial use in labs, the telecommunications sector, workshops with electronic devices, as well as in production facilities and testing institutes. The linear technology used means the device produces a low ripple and low noise. Thanks to the large LED displays, you can easily read the set output voltage and current values at any time. The numbers are easy to read even in low-light conditions. In addition, the individual displays are marked with their corresponding unit abbreviation, clearly distinguishing between current voltage and amperage. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. The dials allow you to precisely adjust the values and thereby guarantee exact setting of the desired current from 0 to 30 V DC and 0 to 5 A for channels I and II, and 0 to 5 V and 0 to 3 A for channel III. During adjustment, you can observe the values in question on the four LED displays and easily modify them to meet your needs. Each of the three channels can be adjusted separately and each supplies one of the three current outputs with the set current values. You can easily choose between two different modes with this dual lab power supply: Parallel or series mode. In series mode you can work with twice the voltage of 60 V, while parallel mode allows you to operate with only one channel at double the current of 10 A. The power supply unit's output can thus be adapted to your individual requirements. This benchtop power supply unit meets the highest standards of safety: The device is equipped with special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. These safety measures guarantee safe operation even with intensive and ongoing use. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Compare prices from:
Stamos Soldering in Electric & Electronics Components

Brand: Stamos Soldering
EAN: 4260223028021
MPN: sls1
Category: Electric & Electronics Components

The Soldering Station S-LS-1 by Stamos Soldering is easy to operate and offers highest comfort when soldering. This professional soldering station was conceived especially for repairs in industry and manufacture or for hobby electricians. Thanks to the compact design and an ergonomic carrying handle it is space saving and mobile. Of course all soldering stations by Stamos Soldering are secured against ESD. The soldering station’s base functions as a power supply unit and offers all desired functions and connections. Additionally it has four LED displays for precise indication of both irons’ temperatures (soldering and hot air). Thanks to the integrated voltmeter you can instantly check your soldered areas. Moreover the Soldering Station S-LS-1 is equipped with a side rack for holding the hot air gun as well as a rack for the soldering iron with a dry sponge. The 650 watt hot air gun is suited for soldering as well as desoldering surface mounted devices (SMD) with the hot air technique. The integrated heating element guarantees efficient heat transfer. In addition to the base and the soldering irons you also receive following accessories: a magnifying lamp for soldering work, 9 soldering tips, 4 hot air nozzles, a pair of soldering tweezers for handling hot parts, desoldering braid to remove solder joints, a measuring cable for continuity checks as well as an IC popper.
Compare prices from:
Stamos Soldering in Electric & Electronics Components

Brand: Stamos Soldering
EAN: 4250928630940
MPN: sls10basic
Category: Building Supplies

The Soldering Station S-LS-10 by Stamos Soldering is easy to operate and offers highest comfort when soldering. This professional soldering station was conceived especially for repairs in industry and manufacture or for hobby electricians. Thanks to the compact design and an ergonomic carrying handle it is space saving and mobile. Of course all soldering stations by Stamos Soldering are secured against ESD. The soldering station’s base functions as a power supply unit and offers all desired functions and connections. Additionally it has a large LED display for precise indication of both irons’ temperatures (soldering and hot air). Moreover the Soldering Station S-LS-10 is equipped with a side rack for holding the hot air gun as well as a rack for the soldering iron with a dry sponge.
Compare prices from:
Stamos Soldering in Building Supplies

Brand: Stamos Soldering
EAN: 4062859948298
MPN: sls79
Category: Laboratory Equipment

The bench power supply S-LS-79 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit from the measuring equipment collection is designed for professional and industrial use in labs, the telecommunications sector, workshops with electronic devices, as well as in production facilities and testing institutes. The linear technology used means the device produces a low ripple and low noise. Thanks to the large LED displays, you can easily read the set output voltage and current values at any time. The numbers are easy to read even in low-light conditions. In addition, the individual displays are marked with their corresponding unit abbreviation, clearly distinguishing between current voltage and amperage. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. The knobs allow you to make both rough and fine adjustments to the desired current values from 0 to 30 V DC and 0 to 20 A. During adjustment, you can monitor the values in question on the large LED display and easily modify them to meet your needs. If the power supply unit operates as a constant voltage source (CV), the unit automatically switches to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. This benchtop power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overload protection (OPP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. These safety measures guarantee safe operation even with intensive and ongoing use. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4250928680198
MPN: sls38
Category: Laboratory Equipment

The laboratory power supply S-LS-38 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit is very quiet and is designed for professional and industrial use in labs, the telecommunications sector, workshops with electronic devices, as well as in production facilities and testing institutes. The switching technology used means the device produces only a low ripple and low noise. The device also has a high adjustment and display resolution of 100 mV / 10 mA. Whether you're a professional in weather and environmental research or working on electrical projects around the house, the laboratory equipment from Stamos Soldering enriches your work. Thanks to the large LED display, you can easily read the set voltage and amperage values at any time. The numbers are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. With this additional fine-tuning, the dual laboratory power supply can be operated in a more individual and more precise manner to provide the exact amount of power that you need. The voltage or current can be fine-tuned to 100 mV / 10 mA. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. This double power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overcurrent protection (OCP), overload protection (OPP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. These safety measures guarantee safe operation even with intensive and ongoing use. This bench power supply has special knobs that allow you to make both rough and fine adjustments to the desired current values from 0 to 30 V DC and 0 to 20 A. During adjustment, you can observe the values in question on the large LED display and easily modify them to meet your needs. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4250928680549
MPN: sls45s
Category: Miscellaneous

The 2-in-1 digital soldering station S-LS-45 S from Stamos Soldering includes both a soldering and hot air station. It is easy to operate and offers the highest comfort when soldering. It is the ideal tool for soldering and repair work on electrical devices as well as for circuit boards, tinning, metal pieces and much more. A magnifying lamp, which enables precise and professional soldering and desoldering in commercial as well as private use, rounds out the set. The high-performance soldering station has an output of 70 watts, and the soldering iron operates within a temperature range of 200 to 480 °C, guaranteeing rapid heating of the soldering iron. The soldering iron's high-quality stainless-steel workmanship and heat-resistant Bakelite threaded insert guarantee an especially long service life. The soldering iron is delivered with an external stand with a built-in cleaning sponge, storage spaces for soldering tips and a holder for roll materials such as desoldering wick. With an operating temperature of 100 to 480 °C and an airflow speed of up to 120 litres per minute, the 650-watt hot air gun is ideal for soldering and desoldering. The station makes it easy to perform filigree work, for example on electronic components (DFP, SOP, QFP, BGA, SOJ, SOT). You can continuously adjust the intensity of the constant stream of hot air. Frequently-used settings can be quickly and easily called up using the electric tool's built-in memory function. The 2-in-1 soldering station has three memory buttons where you can save individual pre-set settings with corresponding operating parameters for the soldering iron or hot air gun. Thanks to the practical holder on the side of the station, you can quickly and safely set down the hot air gun. The controls for the automatic function are integrated into the holder. When the hot air gun is placed into the holder, it goes into standby mode. When you pick it up again, the gun will return to the pre-set temperature and airflow. This saves energy and protects the gun. You can switch the hot air gun from "auto" to "manual" mode for continuous use. The entire 2-in-1 soldering station can be set easily and intuitively using just one control. The large LCD display indicates the temperature of the soldering and hot air guns as well as the intensity of the hot air flow. The device can be adjusted with more variability thanks to the continually adjustable hot air flow for removing adhesives or drying paint. In the premium set, the digital soldering station S-LS-45 S is delivered with extensive accessories, including a variety of different soldering tips and hot air nozzles which enable even more precise work for a wide range of tasks. The magnifying lamp also improves soldering results for particularly delicate and detailed projects. Additional tools such as soldering tweezers, an IC popper and desoldering wick (1.5 m spool) make your everyday work easier and optimise the soldering technology. This electric tool is equipped...
Compare prices from:
Stamos Soldering in Miscellaneous

Brand: Stamos Soldering
EAN: 4062859035677
MPN: sls103
Category: Laboratory Equipment

The laboratory power supply S-LS-103 is specialised to supply external devices with direct current, whereby current strength and current voltage are individually adjustable. The memory function and RS485 interface make the use of this device particularly effective. The benchtop power supply was primarily designed for professional use in the industrial sector, in laboratories, in telecommunications, for workshops with electronic devices as well as for production facilities and testing institutes. The linear technology results in low residual ripple and low noise. Due to the large LED display, you can easily read the set values of the output voltage, current and power at any time. Even when the lighting is bad, the digits are easy to read. In addition, the individual displays are provided with their respective unit abbreviations, so that the current and voltage can be clearly distinguished at any time. There are four memory spaces for frequently-repeated current values, so you can easily call them up again. You can connect the device to a computer via a RS485 interface using the Modbus communication protocol. The user-friendly lab power supply can be controlled very easily and conveniently via rotary knobs and buttons. The knobs allow for precise adjustment for the desired current from 0 to 30 V DC and output voltage from 0 to 10 A. During the adjustment, you can check the respective values on the large LED display and easily adapt them to your needs. Furthermore, the power supply unit has a control panel lock to prevent accidental changing of the set parameters. When the laboratory power supply operates as a constant voltage source (CV), the device switches automatically to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. With the adjustable laboratory power supply, you get an device with a high safety standard: The device has an overvoltage protection (OVP), an overcurrent protection (OCP), an overload protection (OPP), a current limitation and a special overheating protection (OTP). The integrated fan adapts to the internal temperature conditions and ensures optimal cooling. These precautions guarantee safe operation of the power supply, even with intensive and permanent use. The device also has a buzzing alarm, which informs you about safety deficiencies. Non-slip rubber feet additionally ensure a secure stand of the device and also protect the footprint from unwanted scratches. With the lab power supply from Stamos Soldering, you get a thoroughly professional device for the individual direct current supply of various external equipment. Download software
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4062859948212
MPN: sls71
Category: Electric & Electronics Components

The digital soldering station S-LS-71 from Stamos Soldering's professional tools collection proves to be a modern tool wherever electronic components need to be processed, maintained or repaired. Thanks to its compact construction, this device is well-suited to the needs of small to medium-sized businesses. The soldering iron station stands out for its intuitive and precise digital menu navigation, which you can use to adjust the temperature of the soldering iron to meet the exact specifications of a variety of tasks. For your safety, the adjustable soldering station is equipped with an ESD function which prevents electrostatic discharge and protects the electronic component being soldered. The professional digital soldering iron station includes a digitally-controlled power supply with which you can regulate the powerful 150 W soldering iron. Due to the high performance and the four-core ceramic heating element, the soldering station reaches the target temperature within a few seconds. You can set the temperature between 150 and 450 °C in 50 °C increments with a stability of ±2 °C using the control panel, and read it on the digital LCD display. The wide temperature range enables you to precisely solder a variety of materials as well as to create lead-free connections. The LCD display gives you an overview of the temperature values and enables you to re-select them as needed for future projects. You can change out the soldering tips on the soldering iron as needed for securely attaching or removing differently-shaped solder joints. The compact soldering iron station with soldering iron is designed to be highly user-friendly and is ideal for intensive and continuous use. The soldering iron is ergonomic, lightweight and sits comfortably in the hand, making it ideal for filigree or lengthy work. A separate soldering iron holder with integrated dry sponge is also included in delivery. This means that the iron can be safely stored and cleaned during and after work—very good for the sensitive soldering tips in the long term. The power tool can also be used on the move thanks to the high-quality workmanship made of durable materials and the light weight.
Compare prices from:
Stamos Soldering in Electric & Electronics Components

Brand: Stamos Soldering
EAN: 4250928631183
MPN: sls17
Category: Electric & Electronics Components

The Soldering Station S-LS-17 by Stamos Soldering is distinguished by easy handling in combination with highest soldering comfort. It was designed especially for repair work ind industrial businesses, manufacturing firms or hobby electricians. Thanks to the handle for transport it is portable and space saving. Of course the Soldering Stations by Stamos are ESD safe! The base unit functions as the power supply and offers all needed functions and connections. Additionally it is equipped with two LED displays for monitoring the temperature of both soldering iron and hot air gun. Thanks to the integrated voltmeter you can instantly check your soldering results. Moreover the soldering station S-LS-17 is equipped with a side rack for holding the hot air gun. The 650 watt hot air gut is suitable for soldering and de-soldering of surface mount devices (SOIC, CHIP, QFP, PLCC, BGA, SMD) with the hot air technique. The integrated heating element guarantees an efficient transfer of heat. The powerful 75 watt soldering iron enables the production of durable mechanical connections. Thanks to the integrated heating element an ideal temperature transfer is ensured and the heat is directly guided to the soldering tip. The handy design and low weight make precise and comfortable working easily possible. The rack with dry sponge additionally serves for cleaning the soldering tips.
Compare prices from:
Stamos Soldering in Electric & Electronics Components

Brand: Stamos Soldering
EAN: 4062859948649
MPN: sls86
Category: Laboratory Equipment

The adjustable bench power supply S-LS-86 reliably provides direct current to external devices, with individually-adjustable current and voltage. The linear technology used means the device produces only a low ripple and low noise. Whether for professionals in development or for electronics projects at home, measuring equipment from Stamos Soldering supports your project according to your requirements. Thanks to the large LED displays, you can easily read the set voltage and amperage values at any time. The digits are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. You can individually set the desired values for the output current on this benchtop power supply unit using the control dials. The dials allow you to make exact adjustments to the output voltage from 0 - 100 V and the output current from 0 - 3 A. During adjustment you can check the respective values on the large LED display. If the adjustable power supply unit operates as a constant voltage source (CV), the unit automatically switches to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. With the laboratory power supply you get an apparatus with a high safety standard: The unit has been equipped with an overload protection (OPP) as well as an overheating protection (OTP), which automatically activates an integrated fan as soon as the maximum temperature is exceeded. With this monitoring system, safe operation is guaranteed, even with intensive and ongoing use. Non-slip rubber feet ensure stability for the device while also protecting the work surface from unwanted scratches. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4250928683625
MPN: sls31
Category: Laboratory Equipment

The bench power supply S-LS-31 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit is very quiet and is designed for professional and industrial use in labs, the telecommunication sector, workshops with electronic devices and production facilities. The linear technology used means the device produces only a low ripple. The device also has a high adjustment and display resolution of 10 mV / 1 mA. The benchtop dual power supply is also equipped with an RS232 and USB port for remote operation and data collection via PC. Whether you're a professional in weather and environmental research or working on electrical projects around the house, the laboratory equipment from Stamos Soldering enriches your work. Thanks to the two large and colourful LED displays , you can easily read the set voltage and current at any time. The values are shown to the fourth digit on the LED screens, so that even the most accurate values can be represented. The numbers are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. With this additional fine-tuning, the dual laboratory power supply can be operated in a more individual and more precise manner to provide the exact amount of power that you need. The voltage or current can be fine-tuned to 10 mV / 1 mA. The easy-to-use dual power supply can be simply and conveniently controlled using the digital buttons. The device also has four memory function buttons for retrieving settings. This double power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overcurrent protection (OCP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. With this safety system, safe operation is guaranteed, even with intensive and ongoing use. The laboratory power supply unit also has a control panel lock to prevent the set parameters from being accidentally changed. This power supply has special knobs that allow you to make both rough and fine adjustments to the desired current values, guaranteeing precision. During adjustment, you can observe the values in question on the large LED displays and easily modify them to meet your needs. The dual power supply is made of sturdy sheet steel which guarantees high resilience and a long service life. The device emits a beeping sound when it is turned on or off which can likewise be turned on or off. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight, and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct...
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4062859948304
MPN: sls80
Category: Electric & Electronics Components

The bench power supply S-LS-80 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit from the measuring equipment collection is designed for professional and industrial use in labs, the telecommunications sector, workshops with electronic devices, as well as in production facilities and testing institutes. The linear technology used means the device produces a low ripple and low noise. Thanks to the large LED displays, you can easily read the set output voltage and current values at any time. The numbers are easy to read even in low-light conditions. In addition, the individual displays are marked with their corresponding unit abbreviation, clearly distinguishing between current voltage and amperage. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. The knobs allow you to make both rough and fine adjustments to the desired current values from 0 to 30 V DC and 0 to 10 A. During adjustment, you can monitor the values in question on the large LED display and easily modify them to meet your needs. If the power supply unit operates as a constant voltage source (CV), the unit automatically switches to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. This benchtop power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overload protection (OPP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. These safety measures guarantee safe operation even with intensive and ongoing use. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also equipped with a handle and can also be used as a mobile unit thanks to its light weight. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Compare prices from:
Stamos Soldering in Electric & Electronics Components

Brand: Stamos Soldering
EAN: 4250928648815
MPN: sls23
Category: Electric & Electronics Components

Whenever you need to efficiently repair a screen, be it for mobile phones, smartphones or tablets, the LCD separator from Stamos Soldering is the ideal device. Our S-LS-23 model is particularly suitable for electronic workshops and telephony services, but also for do-it-yourself enthusiasts and hobby workshops. This device is equipped with a heater, a gripper and three temperature modes. Additionally, it is fitted with a digital display to increase your work comfort. The fast heating delivers 370 W. A vacuum suction plate (vacuum gripper) allows you to keep the repair tool on the work surface thanks to 14 W and a suction power of 0.05 Mpa. The smartphone is to placed on a special rubber mat, also comprised in the Stamos Soldering kit. No tools are necessary for tightening. Temperature control is based on three modes: 50, 80 (recommended) or 120 °C, allowing the user to adjust it to the specificity of the screen. The selected value of the LCD separator is indicated by the LED on the front of the device, and the temperature by the digital display. The 5 V USB port which is also installed in the front part of the LCD heater allows you to connect compatible devices. Thanks to the large high-quality aluminium working surface, you can work on devices with a maximum diagonal of 8 inches. A drawer with a 16 W UV lamp mounted on the side of the partition screen is used to cure the mounted LCD screen. The timer function ensures that the curing time is set to 15 or 30 min. The value is conveniently displayed on the LED display of the control panel. Stamos Soldering offers a LCD-Separator, which can be used for repairing touch screen devices such as smartphones, tablets and so on. The S-LS-23 model is an indispensable help for electronics service providers, repair shops and DIY workshops.
Compare prices from:
Stamos Soldering in Electric & Electronics Components

Brand: Stamos Soldering
EAN: 4062859035639
MPN: sls99
Category: Laboratory Equipment

The laboratory power supply S-LS-99 is specialised to supply external devices with direct current, whereby current strength and current voltage are individually adjustable. It is also equipped with a 5-V USB interface. The benchtop power supply was primarily designed for professional use in the industrial sector, in laboratories, in telecommunications, for workshops with electronic devices as well as for production facilities and testing institutes. The linear technology results in low residual ripple and low noise. Due to the large LED display, you can easily read the set values of the output voltage, current and power at any time. Even when the lighting is bad, the digits are easy to read. In addition, the individual displays are provided with their respective unit abbreviations, so that the current and voltage can be clearly distinguished at any time. The user-friendly lab power supply can be controlled very easily and conveniently via rotary knobs. The knobs allow for precise adjustment for the desired current from 0 to 30 V DC and output voltage from 0 to 10 A. During the adjustment, you can check the respective values on the large LED display and easily adapt them to your needs. When the laboratory power supply operates as a constant voltage source (CV), the device switches automatically to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. With the adjustable laboratory power supply, you get an device with a high safety standard: The device has an overcurrent protection (OCP), an overload protection (OPP), a current limitation and a special overheating protection (OTP). The integrated fan adapts to the internal temperature conditions and ensures optimal cooling. These precautions guarantee a safe operation of the power supply, even with intensive and permanent use. The device also has a summing alarm, which informs you about safety deficiencies. Non-slip rubber feet additionally ensure a secure stand of the device and also protect the footprint from unwanted scratches. With the lab power supply from Stamos Soldering, you get a thoroughly professional device for the individual direct current supply of various external equipment.
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4250928683618
MPN: sls30
Category: Laboratory Equipment

The bench power supply S-LS-30 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit is very quiet and is designed for professional and industrial use in labs, the telecommunication sector, workshops with electronic devices and production facilities. The linear technology used means the device produces only a low ripple. The device also has a high adjustment and display resolution of 10 mV / 1 mA. Whether you're a professional in weather and environmental research or working on electrical projects around the house, the laboratory equipment from Stamos Soldering enriches your work. Thanks to the two large and colourful LED displays, you can easily read the set voltage and current at any time. The values are shown to the fourth digit on the LED screens, so that even the most accurate values can be represented. The numbers are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. With this additional fine-tuning, the dual laboratory power supply can be operated in a more individual and more precise manner to provide the exact amount of power that you need. The voltage or current can be fine-tuned to 10 mV / 1 mA. The lab power supply unit also has four memory spaces. With the laboratory power supply you get an apparatus with a high safety standard: The device is equipped with overvoltage protection (OVP), overcurrent protection (OCP) and a special overheating protection (OTP), which automatically activates an integrated fan as soon as the maximum temperature is exceeded. This safety system guarantees safe operation of the power supply, even with intensive and long-term use. Furthermore, the power supply has a control panel lock to prevent accidental changing of the set parameters. The desired amperage can also be set individually on this laboratory power supply using special rotary controls. The rotary controls allow both a coarse and a fine adjustment of the values and thus guarantee an exact setting option for the desired current intensity. During the setting you can observe the respective values on the large LED displays and easily adapt them to your needs. The dual power supply is made of sturdy sheet steel which guarantees high resilience and a long service life. The device emits a beeping sound when it is turned on or off which can likewise be turned on or off. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight, and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Welding Group
EAN: 4062859169891
MPN: swmwer308l0.8x5kg
Category: Safety Workwear & Equipment

Do you want to weld stainless steel with your MIG/MAG welder? Then use the welding wire made of a high-quality stainless steel alloy of the Stamos Welding Group! With the high-quality solid wire, you can achieve optimum results with stabilised and non-stabilised CrNi steels. The soldering wire for stainless steel has a diameter of 0.8 mm. Make sure it matches your wire feed in the MIG/MAG welder. Use an inert gas such as argon or helium as a protective gas for stainless steel. Due to its balanced chemical composition of Fe, Cr, Ni and Mn, you will achieve optimal welds with a high tensile strength. The wire electrode is supplied on a spool with a diameter of 20 cm. Thanks to the included amount of 5 kg, you weld extremely effectively even during longer welding jobs. It is ideally suited for MIG/MAG welding work in the catering industry, in the pharmaceutical industry or in craft businesses that process stainless steel.
Compare prices from:
Stamos Welding Group in Safety Workwear & Equipment

Brand: Stamos Soldering
EAN: 4062859948656
MPN: sls87
Category: Laboratory Equipment

The bench power supply S-LS-87 reliably provides direct current to external devices, with individually-adjustable current and voltage. The linear technology used means the device produces only a low ripple and low noise. Whether for professionals in development or for electronics projects at home, measuring equipment from Stamos Soldering supports your project according to your requirements. Thanks to the large LED display, you can easily read the set voltage and amperage values at any time. The digits are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. You can individually set the desired values for the output current on this benchtop power supply unit using the control dials. The dials allow you to make exact adjustments to the output voltage from 0 to 60 V and the output current from 0 to 5 A. During adjustment you can check the respective values on the large LED display. If the power supply unit operates as a constant voltage source (CV), the unit automatically switches to constant current mode (CA) as soon as the set load limit is reached. This prevents damage to the connected devices. This benchtop power supply unit meets the highest standards of safety: The device is equipped with overload protection (OPP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. With this monitoring system, safe operation is guaranteed, even with intensive and ongoing use. Non-slip rubber feet ensure stability for the device while also protecting the work surface from unwanted scratches. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4250928680167
MPN: sls35
Category: Laboratory Equipment

The bench power supply S-LS-35 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply is very quiet and is perfect for use in schools or for hobbies. The linear technology used means the device produces only a low ripple and low noise. The device also has a high adjustment and display resolution of 100 mV / 10 mA. Whether you're a professional in development or working on electrical projects around the house, the laboratory equipment from Stamos Soldering enriches your work. Thanks to the large LED display, you can easily read the set voltage and amperage values at any time. The values are shown to the fourth digit on the LED display, so that even the most accurate values can be represented. The numbers are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. With this additional fine-tuning, the dual laboratory power supply can be operated in a more individual and more precise manner to provide the exact amount of power that you need. The voltage or current can be fine-tuned to 100 mV / 10 mA. The easy-to-use dual power supply can be simply and conveniently controlled using the knobs. This double power supply unit meets the highest standards of safety: The device is equipped with overvoltage protection (OVP), overcurrent protection (OCP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. With this safety system, safe operation is guaranteed, even with intensive and ongoing use. This power supply has special knobs that allow you to individually adjust the desired current. The knobs allow you to make both rough and fine adjustments to the desired current values from 0 to 30 V DC and 0 to 10 A. During adjustment, you can observe the values in question on the large LED display and easily modify them to meet your needs. The power supply also has a built-in overheat protection which starts the cooling fan as soon as the device temperature rises above 40 °C. The fan ceases to run once the device reaches 35 °C. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external devices and equipment.
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4250928683601
MPN: sls29
Category: Laboratory Equipment

The bench power supply S-LS-29 is specially designed to provide direct current to external devices, with individually-adjustable current and voltage. The power supply unit is very quiet and is designed for professional and industrial use in labs, the telecommunication sector, workshops with electronic devices and production facilities. The benchtop dual power supply is also equipped with an RS232 and USB port for remote operation and data collection. Whether you're a professional in weather and environmental research or working on electrical projects around the house, the laboratory equipment from Stamos Soldering enriches your work. The three different modes allow you to easily adjust the voltage from 0 to 30 V 0÷5A. Modes one and two are for manual data entry. In the third mode, you can adjust the parameters via PC using a special software program. This software is compatible with Windows XP, Vista, 7, 8 and 10. Thanks to the two large LED displays, you can easily read the set voltage and current at any time. The values are shown to the fourth digit on the LED screens, so that even the most accurate values can be represented. The glowing red numbers are easy to read even in low-light conditions. In addition, the values are shown with their corresponding unit acronyms, clearly distinguishing between current voltage and amperage. The lab power supply also has four LED diodes which, among other things, indicate which voltage is turned on or whether the overheat protection is active. With this additional fine-tuning, the dual laboratory power supply can be operated in a more individual and more precise manner to provide the exact amount of power that you need. The voltage or current can be fine-tuned to 10 mV / 1 mA. This double power supply unit meets the highest standards of safety: The device is equipped with overcurrent protection (OCP) as well as special overheat protection (OTP) which automatically activates an integrated fan as soon as the maximum temperature is exceeded. With this safety system, safe operation is guaranteed, even with intensive and ongoing use. The laboratory power supply unit also has a control panel lock to prevent the set parameters from being accidentally changed. This power supply has special knobs that allow you to make both rough and fine adjustments to the desired current values, guaranteeing precision. During adjustment, you can observe the values in question on the large LED displays and easily modify them to meet your needs. The dual power supply is made of sturdy sheet steel which guarantees high resilience and a long service life. Non-slip rubber feet ensure additional stability for the device while also protecting the work surface from unwanted scratches. The power supply is also made to be portable thanks to its light weight, and can also be used as a mobile unit. The bench power supply unit from Stamos Soldering is a thoroughly professional device for individually supplying direct current to various external...
Compare prices from:
Stamos Soldering in Laboratory Equipment

Brand: Stamos Soldering
EAN: 4250928641663
Category: Workshop and Tools

Compare prices from:
Stamos Soldering in Workshop and Tools

Brand: Stamos Soldering
EAN: 4062859948359
Category: Measurement

Compare prices from:
Stamos Soldering in Measurement

Brand: Stamos Soldering
EAN: 4062859948281
Category: Measurement

Compare prices from:
Stamos Soldering in Measurement

Brand: Stamos Soldering
EAN: 4062859948243
Category: Measurement

Compare prices from:
Stamos Soldering in Measurement

Brand: Stamos Soldering
EAN: 4260223028083
Category: Workshop and Tools

Compare prices from:
Stamos Soldering in Workshop and Tools

Brand: Stamos Soldering
EAN: 4250928680228
Category: Measurement

Compare prices from:
Stamos Soldering in Measurement

Brand: Stamos Soldering
EAN: 4250928631152
Category: Workshop and Tools

Compare prices from:
Stamos Soldering in Workshop and Tools

Brand: Stamos Soldering
EAN: 4260223028113
Category: Workshop and Tools

Compare prices from:
Stamos Soldering in Workshop and Tools