Stamos Welding Group Helmet Colour | Offers Electric & Electronics Components

Brand: Stamos Welding Group
EAN: 4062859060433
MPN: swgmwhds50
Category: Electric & Electronics Components

The welding magnet from the Stamos Welding Group was specially designed for metal elements and ensures a strong magnetic connection between the individual workpieces, which you can switch on or off again using two switches. The sturdy magnetic bracket can be attached at an angle of 90° and serves as an optimal holder for metal parts during welding, soldering or professional assembly work. The welding magnet offers an internal angle of 90° to which two workpieces can be aligned. Since each contact surface is activated separately via a switch, this simplifies the alignment of the metal pieces, especially if they are heavier. You do not have to loosen the entire magnet if you want to make slight corrections, but only the side on which the workpiece is lying. This ensures particularly precise work with the welding angle! Due to the high adhesive force of up to 50 kg, the magnetic welding bracket is ideal as a link between particularly heavy metal components. Sheets, tubes and other elements made of metal can be effortlessly stapled together. So you always have both hands free for your metalwork so that you can act carefully. The magnetic welding angle has a solid steel casing and guarantees a high level of durability and resilience. In addition, the sturdy steel construction ensures constant dimensional stability, so that the welding angle is permanently retained in its optimal fit even under pressure. If the magnetic force of the magnetic welding clamp is deactivated, it can easily be freed of dirt such as metal shavings or the like.
Compare prices from:
Stamos Welding Group in Electric & Electronics Components

Brand: Stamos Welding Group
EAN: 4062859216588
MPN: swmwer70s41.25.0kgset3
Category: Electric & Electronics Components

Want to weld unalloyed steels with your MIG/MAG welder? Then use high-quality steel alloy welding wire from the Stamos Welding Group! With the steel welding wire you can achieve optimum results with structural steels and other unalloyed steels. The MIG wire for unalloyed steels has a diameter of 1.2 mm. Make sure it matches your wire feed in the MIG/MAG welder. For shielding gas, use active mixed gases from the M2 or M3 group with a high proportion of Argon or C1 for non-alloyed steels. Due to its balanced chemical composition of C, Si and Mn, you can achieve optimal welds with a high tensile strength. The MIG welding wire showcases high arc stability and a low spatter formation, so that you can easily achieve high-quality weld seams. Achieve exceptional efficiency in welding, even during longer tasks, thanks to the provided quantity of 3 x 5 kg. The MIG/MAG welding wire is perfectly suited for work on construction sites, in shipbuilding, or on pressure vessels made of non-alloyed steel or fine-grain carbon-manganese steels.
Compare prices from:
Stamos Welding Group in Electric & Electronics Components

Brand: Stamos Welding Group
EAN: 4062859169891
MPN: swmwer308l0.8x5kg
Category: Electric & Electronics Components

Do you want to weld stainless steel with your MIG/MAG welder? Then use the welding wire made of a high-quality stainless steel alloy of the Stamos Welding Group! With the high-quality solid wire, you can achieve optimum results with stabilised and non-stabilised CrNi steels. The soldering wire for stainless steel has a diameter of 0.8 mm. Make sure it matches your wire feed in the MIG/MAG welder. Use an inert gas such as argon or helium as a protective gas for stainless steel. Due to its balanced chemical composition of Fe, Cr, Ni and Mn, you will achieve optimal welds with a high tensile strength. The wire electrode is supplied on a spool with a diameter of 20 cm. Thanks to the included amount of 5 kg, you weld extremely effectively even during longer welding jobs. It is ideally suited for MIG/MAG welding work in the catering industry, in the pharmaceutical industry or in craft businesses that process stainless steel.
Compare prices from:
Stamos Welding Group in Electric & Electronics Components

Brand: Stamos Welding Group
EAN: 4062859216564
MPN: swmwer70s40.85.0kgset1
Category: Electric & Electronics Components

Want to weld unalloyed steels with your MIG/MAG welder? Then use high-quality steel alloy welding wire from the Stamos Welding Group! With the steel welding wire you can achieve optimum results with structural steels and other unalloyed steels. The MIG wire for unalloyed steels has a diameter of 0.8 mm. Make sure it matches your wire feed in the MIG/MAG welder. For shielding gas, use active mixed gases from the M2 or M3 group with a high proportion of Argon or C1 for non-alloyed steels. Due to its balanced chemical composition of C, Si and Mn, you can achieve optimal welds with a high tensile strength. The MIG welding wire showcases high arc stability and a low spatter formation, so that you can easily achieve high-quality weld seams. Achieve exceptional efficiency in welding, even during longer tasks, thanks to the provided quantity of 3 x 5 kg. The MIG/MAG welding wire is perfectly suited for work on construction sites, in shipbuilding, or on pressure vessels made of non-alloyed steel or fine-grain carbon-manganese steels.
Compare prices from:
Stamos Welding Group in Electric & Electronics Components

Brand: Stamos Welding Group
EAN: 4062859973917
Category: Workshop and Tools

Compare prices from:
Stamos Welding Group in Workshop and Tools

Brand: Stamos Welding Group
EAN: 4062859973924
Category: Workshop and Tools

Compare prices from:
Stamos Welding Group in Workshop and Tools