Wiesenfield Pellet Machine 90 120 | Offers Miscellaneous

Brand: Wiesenfield
EAN: 4062859008503
MPN: wiepm3000
Category: Miscellaneous

With the pellet press from Wiesenfield, you can produce up to 400 kg of feed sticks per hour or process up to 180 kg/h of wood chips. Each piece of the raw material should be less than 6 mm in size. This way, you can produce large quantities of pellets for feeding, fertilising, or heating at a low cost. The cylindrical feed pellets contain only the ingredients that correspond to your recipe. The inserted material is pressed at high pressure through a 230 mm diameter die. The application of pressure and temperatures of 60 - 80 °C generates 6 mm diameter pellets. Heat increases the longevity of the pellets. Thanks to the practical discharge chute made of galvanised sheet steel, you can fill the finished pellets directly into bags or other containers. The pellet press is driven by a PTO shaft via the auxiliary drive of a tractor or other utility vehicle with a power rating of 15 to 28 HP. A protective grid (37 x 37 mm mesh) in the hopper prevents foreign objects or hands from entering the press. The durable pellet machine, crafted from solid cast iron, will serve you faithfully for years to come: A must-have for any agricultural business! Note: Make sure to include the pellet binder in your order (Product number: 10530000). The wheat starch powder makes pressing and storing your pellets easier. Note on wearing parts: You can use the built-in dies and rollers for pellet presses for up to 300 hours. If they are worn, replace them promptly. Wear parts are excluded from the statutory warranty and the extended warranty. You can find corresponding spare parts in the expondo online shop.
Compare prices from:
Wiesenfield in Miscellaneous

Brand: Wiesenfield
EAN: 4062859184597
MPN: wiepm1500b
Category: Miscellaneous

Do you feed or fertilise with pellets? The Wiesenfield pellet press allows you to produce up to 120 kg of feed sticks per hour. And with an operating time of 8 - 10 hours, you can produce large quantities with ease. What should go into your fertiliser sticks and animal feed? It's up to you to decide which vitamins and minerals to add to maize, oats, or hay. But how does it work? Heat the pellet press for vacuum heat treatment to 60 to 80°C. This warming process ensures surfaces remain undamaged or deformed during heating. Next, add the material you wish to press. Two solid rollers push the contents through a die measuring 150 mm in diameter. The result: firmly compressed, durable pellets with a diameter of 6 mm. If you want to produce pellets with a different diameter, you will need different moulds. Make use of the handy discharge chute to fill the finished pellets directly into sacks. The control interface is designed for clarity and ease of use. An emergency stop switch ensures safety. The pellet machine benefits from a powerful 4000 W electric motor and is mobile atop 4 sturdy wheels. The device runs on 400 V high voltage and is supplied without a plug. Note: Make sure to include the pellet binder in your order (Product number: 10530000). The wheat starch powder makes it easier to press and store your pellets. Note on wearing parts: You can use the built-in dies and rollers for pellet presses for up to 300 hours. If they are worn, replace them promptly. Wearing parts are not covered by warranty. Please contact expondo customer service for spare parts.
Compare prices from:
Wiesenfield in Miscellaneous

Brand: Wiesenfield
EAN: 4062859100139
MPN: wiepma15
Category: Miscellaneous

Do you need a new roller for your WIE-PM-1000 pellet mill from Wiesenfield? Then you will find the right spare part for your machine with the roller WIE-PMA-15. It meets the exact requirements of daily pellet production and is aligned to the WIE-PM-1000 pellet mill in terms of shape and size. The pellet press can be installed in the WIE-PM-1000 pellet machine in just a few steps. With dimensions of 86 x 252 mm, it fits precisely over the mould of the pellet machine. When mounting, make sure that there is a clearance of 0.1 to 0.3 mm between the roller and the mould. When properly installed, it evenly delivers pellets, which you can use for feeding or fertilising, depending on their composition. The roller pellet machine is made of a durable steel alloy that can easily withstand high production numbers. Do you own another pellet mill from Wiesenfield? No problem, expondo offers customised rollers and other accessories for all pellet presses, with the usual outstanding Wiesenfield quality, of course! Note: The dies for pellet presses can be used for up to 300 hours. If these are worn out, replace them promptly. Parts are not guaranteed for three years. You can find the corresponding spare parts in the expondo online shop.
Compare prices from:
Wiesenfield in Miscellaneous

Brand: Wiesenfield
EAN: 4062859184603
MPN: wiepm2000b
Category: Miscellaneous

Do you feed, fertilise or heat with pellets? The Wiesenfield pellet press allows you to produce up to 300 kg of feed sticks per hour. Or you can process wood chips, up to 120 kg/h. What should go into your fertiliser sticks and animal feed? It's up to you to decide which vitamins and minerals to add to maize, oats, or hay. You can also produce pellets from sawdust and eco-friendly fuel your stove. But how does it work? Heat the pellet press for vacuum heat treatment to 60 to 80°C. This warming process ensures surfaces remain undamaged or deformed during heating. Next, add the material you wish to press. Two solid rollers push the contents through a die measuring 200 mm in diameter. The result: firmly compressed, durable pellets with a diameter of 6 mm. If you want to produce pellets with a different diameter, you will need different moulds. Make use of the handy discharge chute to fill the finished pellets directly into sacks. The control interface is designed for clarity and ease of use. An emergency stop switch ensures safety. The pellet machine benefits from a powerful 7500 W electric motor and is mobile atop 4 sturdy wheels. The device runs on 400 V high voltage and is supplied without a plug. Note: Make sure to include the pellet binder in your order (Product number: 10530000). The wheat starch powder makes it easier to press and store your pellets. Note on wearing parts: You can use the built-in dies and rollers for pellet presses for up to 300 hours. If they are worn, replace them promptly. Wearing parts are not covered by warranty. Please contact expondo customer service for spare parts.
Compare prices from:
Wiesenfield in Miscellaneous

Brand: Wiesenfield
EAN: 4062859190178
MPN: wiepm4500
Category: Miscellaneous

Do you feed, fertilise or heat with pellets? The Wiesenfield pellet press allows you to produce up to 1100 kg of feed sticks per hour. Or you can process wood chips, up to 450 kg/h. What should go into your fertiliser sticks and animal feed? It's up to you to decide which vitamins and minerals to add to maize, oats, or hay. You can also produce pellets from sawdust and eco-friendly fuel your stove. But how does it work? Heat the pellet press for vacuum heat treatment to 60 to 80°C. This warming process ensures surfaces remain undamaged or deformed during heating. Next, add the material you wish to press. Two solid rollers push the contents through a die measuring 400 mm in diameter. The result: firmly compressed, durable pellets with a diameter of 6 mm. If you want to produce pellets with a different diameter, you will need different moulds. Make use of the handy discharge chute to fill the finished pellets directly into sacks. The control interface is designed for clarity and ease of use. An emergency stop switch ensures safety. The pellet machine runs on a 30000 W electric motor and is powered by 400 V mains electricity. It is supplied without a plug. Note: Make sure to include the pellet binder in your order (Product number: 10530000). The wheat starch powder makes it easier to press and store your pellets. Note on wearing parts: You can use the built-in moulds and rollers for pellet presses for up to 300 hours. If they are worn, replace them promptly. Wearing parts are not covered by warranty. Please contact expondo customer service for spare parts.
Compare prices from:
Wiesenfield in Miscellaneous

Brand: Wiesenfield
EAN: 4062859184627
MPN: wiepm2600b
Category: Miscellaneous

Do you feed, fertilise or heat with pellets? The Wiesenfield pellet press allows you to produce up to 600 kg of feed sticks per hour. Or you can process wood chips, up to 250 kg/h. What should go into your fertiliser sticks and animal feed? It's up to you to decide which vitamins and minerals to add to maize, oats, or hay. You can also produce pellets from sawdust and eco-friendly fuel your stove. But how does it work? Heat the pellet press for vacuum heat treatment to 60 to 80°C. This warming process ensures surfaces remain undamaged or deformed during heating. Next, add the material you wish to press. Two solid rollers push the contents through a die measuring 260 mm in diameter. The result: firmly compressed, durable pellets with a diameter of 6 mm. If you want to produce pellets with a different diameter, you will need different moulds. Make use of the handy discharge chute to fill the finished pellets directly into sacks. The control interface is designed for clarity and ease of use. An emergency stop switch ensures safety. The pellet machine benefits from a powerful 15000 W electric motor and is mobile atop 4 sturdy wheels. The device runs on 400 V high voltage and is supplied without a plug. Note: Make sure to include the pellet binder in your order (Product number: 10530000). The wheat starch powder makes it easier to press and store your pellets. Note on wearing parts: You can use the built-in dies and rollers for pellet presses for up to 300 hours. If they are worn, replace them promptly. Wearing parts are not covered by warranty. Please contact expondo customer service for spare parts.
Compare prices from:
Wiesenfield in Miscellaneous

Brand: Wiesenfield
EAN: 4062859100191
MPN: wiepma21
Category: Miscellaneous

Need a new roller for your WIE-PM-2000 pellet mill from Wiesenfield? Then you will find the right spare part for your machine with the WIE-PMA-21 roller. It meets the requirements of daily pellet production well and is aligned in shape and size to the pellet mill WIE-PM-2000 (10280042). The roller pellet press can be installed in the WIE-PM-2000 pellet machine in just a few steps. With dimensions of 100 x 286 mm, it fits precisely over the die of the pellet machine. When mounting, make sure that there is a clearance of 0.1 to 0.3 mm between the roller and the die. Properly installed, it reliably delivers pellets evenly, which you can use for feeding or fertilising, depending on their composition. The roller pellet machine is made of a durable steel alloy that can easily withstand high production numbers. Do you own another pellet mill from Wiesenfield? No problem, expondo offers customised rollers and other accessories for all pellet presses, of course always in outstanding Wiesenfield quality! Note: The rollers for pellet presses can be used for up to 300 hours. If these are worn out, replace them promptly. Consumable parts are not guaranteed for three years. You can find the corresponding spare parts in the expondo online shop.
Compare prices from:
Wiesenfield in Miscellaneous

Brand: Wiesenfield
EAN: 4062859269379
MPN: wiepm3400
Category: Miscellaneous

Do you feed or fertilise with pellets? With the Wiesenfield pellet press, you can produce up to 100 kg of feed sticks per hour. Alternatively, you can process up to 60 kg of wood chips per hour. Each piece of the raw material should be less than 6 mm in size. The pellet press is powered by a 4000 W motor running on 400 V high-voltage current. Moreover, the ability to run continuously for 24 hours enables the effortless production of large quantities. The control element is clearly organised and intuitive. An easily accessible emergency stop button ensures safety – as does the protective grid in the large filling hopper. Whether wood pellets or feed granules, the pellet machine presses various materials into practical sticks. But how does it work? You heat the pellet press to 60 to 80°C. Then, two heavy rollers press the raw material through a 150 mm diameter die. The result: tightly compressed, durable pellets with a 6 mm diameter. If you want to produce pellets of a different size, you’ll need different dies. Use the practical discharge chute to fill the finished pellets directly into bags. Note on wearing parts: You can use the built-in dies and rollers for pellet presses for up to 300 hours. If they are worn, replace them promptly. Wear parts are excluded from the statutory warranty and the extended warranty. You can find corresponding spare parts in the expondo online shop.
Compare prices from:
Wiesenfield in Miscellaneous

Brand: Wiesenfield
EAN: 4062859184566
MPN: wiepm1200a
Category: Miscellaneous

Do you feed or fertilise with pellets? The Wiesenfield pellet press allows you to produce up to 100 kg of feed sticks per hour. And with an operating time of 8 - 10 hours, you can produce large quantities with ease. What should go into your fertiliser sticks and animal feed? It's up to you to decide which vitamins and minerals to add to maize, oats, or hay. But how does it work? Heat the pellet press for vacuum heat treatment to 60 to 80°C. This warming process ensures surfaces remain undamaged or deformed during heating. Next, add the material you wish to press. Two solid rollers push the contents through a die measuring 120 mm in diameter. The result: firmly compressed, durable pellets with a diameter of 6 mm. If you want to produce pellets with a different diameter, you will need different moulds. Make use of the handy discharge chute to fill the finished pellets directly into sacks. The control interface is designed for clarity and ease of use. An emergency stop switch ensures safety. The pellet machine benefits from a powerful 7.5 HP petrol motor and is mobile atop 4 sturdy wheels. Note: Make sure to include the pellet binder in your order (Product number: 10530000). The wheat starch powder makes it easier to press and store your pellets. Note on wearing parts: You can use the built-in dies and rollers for pellet presses for up to 300 hours. If they are worn, replace them promptly. Wearing parts are not covered by warranty. Please contact expondo customer service for spare parts.
Compare prices from:
Wiesenfield in Miscellaneous

Brand: Wiesenfield
EAN: 4062859269386
MPN: wiepm3500
Category: Miscellaneous

Do you feed or fertilise with pellets? With the Wiesenfield pellet press, you can produce up to 120 kg of feed sticks per hour. Alternatively, you can process up to 90 kg of wood chips per hour. Each piece of the raw material should be less than 6 mm in size. The pellet press is powered via a PTO shaft through the auxiliary drive of a tractor or other utility vehicle with a power output of 8 to 12 HP. Moreover, the ability to run continuously for 24 hours enables the effortless production of large quantities. The control element is clearly organised and intuitive. An easily accessible emergency stop button ensures safety – as does the protective grid in the large filling hopper. Whether wood pellets or feed granules, the pellet machine presses various materials into practical sticks. But how does it work? You heat the pellet press to 60 to 80°C. Then, two heavy rollers press the raw material through a 150 mm diameter die. The result: tightly compressed, durable pellets with a 6 mm diameter. If you want to produce pellets of a different size, you’ll need different dies. Use the practical discharge chute to fill the finished pellets directly into bags. Note on wearing parts: You can use the built-in dies and rollers for pellet presses for up to 300 hours. If they are worn, replace them promptly. Wear parts are excluded from the statutory warranty and the extended warranty. You can find corresponding spare parts in the expondo online shop.
Compare prices from:
Wiesenfield in Miscellaneous

Brand: Wiesenfield
EAN: 4062859164872
MPN: wiepm2700
Category: Miscellaneous

Do you need excellent raw material made of grain, straw, alfalfa or wood flakes for your pellet press to produce pellets? Then make it yourself with the hammer mill from Wiesenfield! The powerful machine shreds a wide variety of materials into fine grain sizes that you can easily process. In this way, you get exactly the regrind you need for animal feed production or for the production of wood pellets. With an output of 4 kW, the motor drives the 16 hammers in the mill, which reach a rotational speed of 2800 rpm. Thanks to the first-class performance values, you can achieve a production rate of 200 - 300 kg / h with the hammer mill. Note that the amount depends on the type of grain or raw material and the moisture content of the material. For best results, the humidity should not exceed 15%. The centrifugal forces that act on the grist during crushing drive the grains against the outer sieve. The size of the holes in the sieve determines how coarse your grinder will be. Hole sizes of 4 and 6 mm are available for the hammer mill. The finished grist is specifically filled with a cyclone. The hammer mill for pellet production impresses with its easy handling, a large filling funnel and a robust construction, thanks to which you can also produce and process large quantities of ground products. The stable footprint guarantees you safe production at all times.
Compare prices from:
Wiesenfield in Miscellaneous

Brand: Wiesenfield
EAN: 4062859164896
MPN: wiepm2900
Category: Miscellaneous

Do you need excellent raw material made of grain, straw, alfalfa or wood flakes for your pellet press to produce pellets? Then make it yourself with the hammer mill from Wiesenfield! The powerful machine shreds a wide variety of materials into grain sizes that you can easily process further. In this way, you get exactly the regrind you need for animal feed production or for the production of wood pellets. With an output of 22 kW, the motor drives the 24 hammers in the mill, which reach a rotational speed of 2982 rpm. Thanks to the first-class performance values, you can achieve a production rate of 800 - 1800 kg / h with the hammer mill. Note that the amount depends on the type of grain or raw material and the moisture content of the material. For best results, the humidity should not exceed 15%. The centrifugal forces that act on the grist during crushing drive the grains against the outer sieve. The size of the holes in the sieve determines how coarse your grinder will be. Hole sizes of 4 and 6 mm are available for the hammer mill. The finished grist is specifically filled with a cyclone. The hammer crusher for pellet production is impressive with its easy handling, a large feed hopper as well as a robust construction, thanks to which you also quickly produce and further process ground material. The stable feet guarantees safe production at all times.
Compare prices from:
Wiesenfield in Miscellaneous

Brand: Wiesenfield
EAN: 4062859008503
Category: Agriculture

Compare prices from:
Wiesenfield in Agriculture